User manual

P6101B Instructions

Features and Accessories

The P6101B probe is compatible with most general purpose

oscilloscopes that have a 1 MW input impedance and bandwidth up

to 15 MHz.

NOTE. Remove and discard the protective cover on the tip of the

probe before attempting to connect a probe tip accessory.

BNC-to-probe tip adapter. To install the adapter,

push the wide end firmly into a BNC connector.

Then insert the probe tip firmly into the adapter.

Retractable hook tip. Use the retractable hook tip to

make hands-free measurements.

NOTE.

For a solid connection, firmly push and

twist the hook tip onto the probe tip before using.

Marker rings. Attach the matching colored rings

onto the probe cable and tip as shown.