User manual

Replaceable Electrical Parts
Component Number
(column 1 of the parts list)
The circuit com
ponent number appears on the diagrams and circuit board
illustrations. Each diagram and circuit board illustration is clearly marked with
the assembly number. Assembly numbers are also marked on the mechanical
exploded views located in the mechanical p arts list. The c omponent number is
obtained by adding the assembly number prefix to the circuit number.
The electrical parts list is divided and arranged by assemblies in numerical
sequence (e .g., assembly A1 with its subassemblies and parts, precedes assembly
A2 with its subassemblies and parts).
Chassis-mounted parts have no assembly number prefix and are located at the
end of the electrical parts list.
Tektroni
x Part Number
(column 2 of the parts list)
Indicates part number to be used when ordering replacement part from Tektronix.
Serial Number (columns 3
&4ofthepartslist)
Column three (3) indicates the serial number at which the part was first used.
Column four (4) indicates the serial number at which the part was removed. No
serial number entered indicates part is good for all serial numbers.
Name & Description
(column five of the parts
list)
In the parts list, an item n ame is separated from the description by a colon (:).
Because of space limitations, an item name may sometimes appear as incomplete.
For further item name identification, the U.S. Federal Catalog handbook H6-1
can be utilized where possible.
P6022 Instruction Manual 29