User manual

Service Information
Typical Chara
cteristics
This section lists the various typical characteristics that describe the P6022
Current Probe. Included are typical electrical and mechanical characteristics.
Typical characteristic s are described in terms of typical or average performance.
Typical characteristics are not warranted.
Table 4: El
ectrical characteristics
Characteristic Information
Tilt
1mA/mV
10 mA/mV
4% or less within 1ms of step
4% or less within 10ms of step
Maximum DC without saturation
0.2 A
Signal delay, 5-foot probe with termination
Approximately 9 ns
Insertion impedance
0.03 Ω or less at 1 MHz, increasing to 0.2 Ω
or less
at 120 MHz
Rise time
1mA/mV
10 mA/mV
≤3.2 n
s
≤2.9 ns
Step response
Becau
se the oscilloscope input capacitance
becomes a part of the termination network,
the step response will vary with different
osci
lloscopes
Aber
rations (probe and termination at either
sensitivity setting.)
≤15%
peak-to-peak within 25 ns of step;
≤2% peak-to-peak thereafter
Table 5: Mechanical characteristics
Characteristic Information
Probe cable length
5 ft, 1.5 m
Net weight:
Probe and 5-foot cable
Termination
2.5 oz, ≈71 gm
1.7 oz, ≈48 gm
Termination L 3.47", 88 mm
W 1.10", 28 mm
H 0.86", 22 mm
Probe body L 6.0", 152 mm
W0.4",10mm
H0.6",15mm
Maximum conductor diameter 0.11", 2.79 m m
P6022 Instruction Manual 11