User manual

Operator Information
This manual describes the P6022 current probe with passive termination, and
provides information about making measurements with the probe.
Description
The P6022 current probe converts an a lternating current waveform to a voltage
that can be
displayed and measured on an oscilloscope d isplay. It provides
accurate current measurements over a wide range of frequencies, and allows you
to measure current without breaking the circuit.
The P6022 probe is compatible with general-purpose ground-referenced
oscilloscopes having a 1 MΩ input impedance. The P6022 probe comes with a
passive termination that matches oscilloscope and probe impedance, optimizes the
probe performance, and provides two sensitivity settings.
The P6022 probe comes with a 5-foot cable, termination, and 6” ground lead.
Figure 1: P6022 probe, termination, and ground lead
P6022 Instruction Manual 1