User manual

Adjustments
2-8
P6015A Instruction Manual
100 s
R4,C2
200 s
R2,C1
50 s
R5,C4
Figure 2- 3: Periods Affected by Compensation Adjustments
6. Adjust R2 and C1 to flatten the area 200  s from the leading
corner. Refer to Figure 2 --3 to locate the zones affected by the
adjustments in this and the following steps.
NOTE. Figure 2--3 shows an idealized waveform. The displayed
waveform will include some ground lead ringing.
7. Adjust R4 and C2 to flatten the area 100  s from the leading
corner.
8. Adjust R5 and C4 to flatten the area 50 s from the leading
corner.
Adjustments R2, R4, R5, C1, C2, C4, and C5 inte ract. Steps 4 and 6
through 8 may have to be repeated several times to achieve optimum
flatness.