User manual

In Detail
1-20
P6015A Instruction Manual
Caring for the Probe
Follow these guidelines to prolong the life of your probe:
H Observe the time and temperature specifications for this product
shown in the Maximum Input Voltage Chart on page 1--4.
H Don’t connect a probe ground lead to elevated (“hot”) circuitry.
The resultant da mage is not covered by probe warranties.
H Don’t measure voltages in excess of the probe’s maximum
voltage rating.
H Don’t mount the probe into fixtures by its nonmetallic front end.
Mount the probe only by its meta llic shield portion.
H Don’t attempt to remove the rubber cushioning ring from t he
inner body assembly of the probe head.
H Don’t attempt to disassemble the inner body assembly.
H When you are not using the probe , place the probe and its
accessories in the case provided.
H Don’t use the probe to scrape through insulation, pry compo-
nents, or to move components.
H When necessary, clean the probe with a damp cloth.