Datasheet

Save and Recall I
nformation
Saving and Recalling Waveform Data
Waveform data consists of the numeric values for each point in the waveform. It copies the data, as opposed to a graphical
image of the screen. To save the current waveform data or to recall previously stored waveform data:
1. Push Save / Recall M enu.
2. Push Save Waveform or Recall Waveform
from the lower-bezel menu.
Save
Screen
Image
Save
Waveform
Save
Setup
Recall
Waveform
Recall
Setup
Assign
Save|to
Waveform
File
Utilities
NOTE. The oscilloscope can save digital
waveforms to .csv files, not reference memories.
The oscilloscope cannot recall digital waveforms.
3. Select one waveform or all waveforms.
4. From the resulting side-bezel menu, select
the location to save the waveform data to or
to recall it from.
Save the information externally to a file
onaUSBflash drive. Alternatively, save
the information internally to one of the two
reference memory files.
114 MSO2000B and DPO2000B Series O scilloscopes User Manual