Datasheet

Bus decoding
Tired of having to visually inspect the waveform to count clocks, determine
if each bit is a 1 or a 0, combine bits into bytes, and determine the hex
value? Let the oscilloscope do it for you! Once you've set up a bus, the
MSO/DPO2000B Series will decode each packet on the bus, and display
the value in hex, binary, decimal (LIN only), or ASCII (RS-232/422/485/
UART only) in the bus waveform.
Event table
In addition to seeing decoded packet data on the bus waveform itself, you
can view all captured packets in a tabular view much like you would see in
a software listing. Packets are time stamped and listed consecutively with
columns for each component (Address, Data, etc.).
Event table showing decoded Identifier, DLC, DATA, and CRC for every CAN packet in a
long acquisition.
Search
Serial triggering is very useful for isolating the event of interest, but once
you've captured it and need to analyze the surrounding data, what do you
do? In the past, users had to manually scroll through the waveform
counting and converting bits and looking for what caused the event. With
the MSO/DPO2000B Series, you can have the oscilloscope automatically
search through the acquired data for user-defined criteria including serial
packet content. Each occurrence is highlighted by a search mark. Rapid
navigation between marks is as simple as pressing the Previous (←) and
Next (→) buttons on the front panel.
Designed to make your work easier
The MSO/DPO2000B is designed to make your work easier. The bright,
widescreen display shows a long time window. Dedicated front-panel
controls simplify operation. A USB host port on the front panel allows you to
easily transfer screenshots, instrument settings, and waveform data to a
USB flash drive.
Bright, widescreen display
The MSO/DPO2000B Series features a 7 inch (180 mm) widescreen, TFT-
LCD display for seeing intricate signal details.
Dedicated front-panel controls
Per-channel vertical controls provide simple and intuitive operation. No
longer do you need to share one set of vertical controls across all four
channels.
Connectivity
A USB host port on the front panel enables easy transfer of screenshots,
instrument settings, and waveform data to a USB thumb drive. The rear
panel contains a USB device port for controlling the oscilloscope remotely
from a PC or for connecting a USB keyboard. The USB device port can
also be used to print directly to a PictBridge
®
-compatible printer. An
optional 10/100 Ethernet port enables easy connection to networks and an
optional Video Out port allows the oscilloscope display to be exported to an
external monitor or projector.
Compact form factor
A compact, portable form factor allows the MSO/DPO2000B Series to be
easily moved between labs and, with a depth of just 5.3 inches (134 mm), it
saves you valuable space on your test bench.
Datasheet
6 www.tek.com