Datasheet

Discover - A waveform capture rate of 5,000 wfm/s maximizes the probability of capturing
elusive glitches and other infrequent events.
Capture
Discovering a device fault is only the first step. Next, you must capture the
event of interest to identify root cause.
The MSO/DPO2000B Series provides a complete set of triggers - including
runt, logic, pulse width/glitch, setup/hold violation, serial packet, and
parallel data - to help quickly find your event. With up to a 1 Mpoint record
length, you can capture many events of interest, even thousands of serial
packets, in a single acquisition for further analysis while maintaining high
resolution to zoom in on fine signal details.
From triggering on specific packet content to automatic decode in multiple
data formats, the MSO/DPO2000B Series provides integrated support for a
broad range of serial buses - I
2
C, SPI, CAN, LIN, and RS-232/422/485/
UART. The ability to decode up to two serial and/or parallel buses
simultaneously means you gain insight into system-level problems quickly.
To further help troubleshoot system-level interactions in complex
embedded systems, the MSO2000B Series offers 16 digital channels in
addition to its analog channels. Since the digital channels are fully
integrated into the oscilloscope, you can trigger across all input channels,
automatically time-correlating all analog, digital, and serial signals.
Capture - Triggering on a specific transmit data packet going across an RS-232 bus. A
complete set of triggers, including triggers for specific serial packet content, ensures you
quickly capture your event of interest.
Search
Finding your event of interest in a long waveform record can be time
consuming without the right search tools. With today's record lengths
pushing to a million data points, locating your event can mean scrolling
through thousands of screens of signal activity.
The MSO/DPO2000B Series offers the industry's most comprehensive
search and waveform navigation with its innovative Wave Inspector
®
controls. These controls speed panning and zooming through your record.
A unique force-feedback system lets you move from one end of your record
to the other in just seconds. You can mark any location you may want to
reference later for further investigation, and automatically search the record
using criteria that you define. Wave Inspector will instantly search your
entire record, including analog, digital, and serial bus data. Along the way, it
will automatically mark every occurrence of your defined event so you can
quickly move between events.
Search - I
2
C decode showing results from a Wave Inspector search for Address value
50. Wave Inspector controls provide unprecedented efficiency in viewing and navigating
waveform data.
Analyze
Verifying that your prototype's performance matches simulations and meets
the project's design goals requires analyzing its behavior. Tasks can range
from simple checks of rise times and pulse widths to sophisticated power
loss analysis and investigation of noise sources.
The MSO/DPO2000B Series offers a comprehensive set of integrated
analysis tools including waveform- and screen-based cursors,
29 automated measurements, and FFT analysis. Specialized application
support for serial bus analysis is also available.
Analyze - FFT analysis of a pulsed signal. A comprehensive set of integrated analysis
tools speeds verification of your design's performance.
Datasheet
2 www.tek.com