Datasheet

Input/output ports
USB 2.0 high-speed host port Supports USB mass storage devices, printers, and keyboards. One port available on rear panel and one on front panel.
USB 2.0 high-speed device port Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB with a TEK-USB-488, and direct
printing to all PictBridge
®
-compatible printers.
LAN port (Ethernet) RJ-45 connector, supports 10/100BASE-T (requires DPO2CONN).
Video out port DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector (requires DPO2CONN).
Auxiliary input Front-panel BNC connector. Input Impedance 1 MΩ ±2%. Max input 300 V
RMS
CAT II with peaks ≤ ±450 V.
Probe compensator output voltage
and frequency
Front-panel pins
Amplitude 5 V
Frequency 1 kHz
Kensington-style lock Rear-panel security slot connects to standard Kensington-style lock.
Power source
Power source voltage 100 to 240 V ±10%
Power source frequency 45 to 65 Hz (90 to 264 V)
360 to 440 Hz (100 to 132 V)
Power consumption 80 W maximum
Optional TekVPI
®
external power
supply
Output voltage 12 V
Output current 5 A
Power consumption 50 W
Physical characteristics
Dimensions
mm
in.
Height 180 7.1
Width 377 14.9
Depth 134 5.3
Weight
kg
lb.
Net 3.6 7.9
Shipping 6.2 13.7
Rackmount configuration 4U
Cooling clearance 2 in. (50 mm) required on left side and rear of instrument
Datasheet
12 www.tek.com