Datasheet

Acquisition system

Acquisition Modes

Sample Acquire sampled values.

Peak Detect Captures glitches as narrow as 3.5 ns at all sweep speeds.

Averaging From 2 to 512 waveforms included in average.

Roll Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div.

Waveform measurements

Cursors Waveform and Screen.

Automatic measurements 29, of which up to four can be displayed on-screen at any one time. Measurements include: Period, Frequency, Delay, Rise Time,

Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive

Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Positive

Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area and Cycle Area.

Gating Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, or waveform cursors.

Waveform math

Arithmetic Add, subtract, and multiply waveforms.

FFT Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or

Blackman-Harris.

Software

OpenChoice

Desktop Enables fast and easy communication between a Windows PC and your oscilloscope using USB or LAN. Transfer and save

settings, waveforms, measurements, and screen images. Included Word and Excel toolbars automate the transfer of acquisition

data and screen images from the oscilloscope into Word and Excel for quick reporting or further analysis.

IVI driver Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI,

Microsoft .NET, and MATLAB.

e*Scope

Web-based remote

control

Enables control of the oscilloscope over a network connection through a standard web browser. Simply enter the IP address or

network name of the oscilloscope and a web page will be served to the browser. Transfer and save settings, waveforms,

measurements, and screen images or make live control changes to settings on the oscilloscope directly from the web browser.

Display system

Display type 7 inch (180 mm) wide format liquid crystal TFT color display.

Display resolution 480 horizontal × 234 vertical pixels (WQVGA).

Waveform styles Vectors, Dots, Variable Persistence, Infinite Persistence.

Graticules Full, Grid, Cross Hair, Frame.

Format YT and XY.

Maximum waveform capture rate Up to 5,000 wfm/s.

MSO/DPO2000B Series Mixed Signal Oscilloscope