Datasheet

Datasheet
www.tektronix.com28
Spurious response
2nd and 3rd harmonic distortion (>100 MHz)
< -60 dBc (< -65 dBc, typical), with auto settings on and signals 10 dB below reference level
2nd and 3rd harmonic distortion (9 kHz to 100 MHz )
< -57 dBc (< -60 dBc, typical), with auto settings on, signals 10 dB below reference level, and reference
level ≤ -15 dBm
2nd order intermodulation distortion (>200 MHz)
< -60 dBc (< -65 dBc, typical), with auto settings on and signals 10 dB below reference level
2nd order intermodulation distortion (>100MHz to ≤200MHz)
<-57 dBc (<-60 dBc, typical), with auto settings on and signals 10 dB below reference level.)
2nd order intermodulation distortion (10 MHz to 100 MHz)
< -60 dBc (< -65 dBc, typical), with auto settings on, signals 10 dB below reference level, and reference
level ≤ -15 dBm
3rd order intermodulation distortion (>10 MHz)
< -62 dBc (<-65 dBc, typical), with auto settings on and signals 10 dB below reference level, and reference
levels < -15 dBm
3rd order intermodulation distortion (9 kHz to 10 MHz)
< -62 dBc (<-65 dBc, typical), with auto settings on and signals 10 dB below reference level, and reference
levels < -15 dBm
A/D spurs < -60 dBc (< -65 dBc, typical), with auto settings on and signals 5 dB below reference level. Excludes A/D
aliasing spurs
A/D aliasing spurs At (5 GHz – Fin) and (8 GHz – Fin): <-55 dBc (<-60 dBc, typical), with auto settings on and signals 5 dB below
reference level
Specications that only apply to models with option SA6
IF Rejection: (All Input Frequencies except: 1.00 GHz to 1.25 GHz and 2 GHz to 2.4 GHz): < -55 dBc, typical
IF spurs at (5 GHz – Fin) for input frequencies from 1.00 GHz to 1.25 GHz: < -50 dBc, typical
IF spurs at (6.5 GHz -Fin) for input frequencies from 2 GHz to 2.4 GHz: < -50 dBc, typical
Image Rejection: < -50 dBc (for input frequencies from 5.5 GHz to 9.5 GHz)
Residual response < -85 dBm (< -78 dBm at 2.5 GHz, 3.75 GHz, 4.0 GHz, 5.0 GHz, and typical at 6.0 GHz) with ≤ -25 dBm refer-
ence level and input terminated with 50 Ω
Absolute amplitude accuracy Accuracy of power level measurements at the center frequency. At frequencies away from center frequency, add
Channel Response to the Absolute Amplitude Accuracy. Applies to signal to noise ratios > 40 dB.
< ± 1.0 dB (< ±0.5 dB, typical), 18 °C –28 °C temperature range, 50 kHz to 6 GHz frequency range, reference
levels -25, -20, -15, -10, -5, 0, 5, 10 dBm
< ± 1.0 dB, typical, 50 kHz to 6 GHz, all other reference levels, 18 °C –28 °C temperature range
< ±1.5 dB, typical, 50 kHz to 6 GHz, all reference levels, 0 °C to 50 °C temperature range
< ± 2.0 dB, typical, 9 kHz to 50 kHz, all reference levels, 18 °C to 28 °C temperature range
< ± 3.0 dB, typical, 9 kHz to 50 kHz, all reference levels, 0 °C to 50 °C temperature range
Channel response Valid over 18 –28 °C temperature range.
Specification applies to signal-to-noise ratios > 40 dB
Measurement center
frequency range Span
Amplitude
atness, pk-pk
Amplitude
atness, RMS
Phase
linearity, RMS
15 MHz –6 GHz 10 MHz 0.3 dB 0.15 dB 1.5 °
60 MHz –6 GHz ≤ 100 MHz 0.75 dB 0.27 dB 1.5 °
170 MHz –6 GHz ≤ 320 MHz 0.85 dB 0.27 dB 2.5 °
510 MHz –6 GHz ≤ 1, 000 MHz 1.0 dB 0.3 dB 3.0 °
Any (for start frequency
> 10 MHz)
> 1, 000 MHz 1.2 dB N/A N/A