Datasheet

www.tektronix.com 41
Mixed Domain Oscilloscopes
Other RF probes
Contact Beehive Electronics to order: http://beehive-electronics.com/probes.html
101A EMC probe set
150A EMC probe amplifier
110A Probe cable
0309-0001 SMA probe adapter
0309-0006 BNC probe adapter
Step 4 Add instrument upgrades in the future
Instrument upgrades
The MDO4000C Series products offer a number of ways to add functionality after the initial purchase. Listed below are the various product upgrades
available and the method of upgrade used for each product.
Free instrument options The following options are available free of charge when the MDO4000C product is registered at
www.tektronix.com/mdo4register.
Digital Voltmeter and Frequency Counter
4-digit AC
rms
, DC, AC+DC
rms
voltage measurements and 5-digit frequency counter. Unique software option key
provided upon instrument registration enables the features.
Post-purchase instrument options
The following products are sold as stand-alone products and can be purchased at any time to add functionality
to any MDO4000C product.
MDO4AFG Add arbitrary function generator to any MDO4000C Series product.
One-time, permanent upgrade to any model enabled through single-use application module hardware key. The
hardware key is used to enable the feature and then is not required for future use.
MDO4MSO Add 16 digital channels; includes P6616 digital probe and accessories.
One-time, permanent upgrade to any model enabled through single-use application module hardware key. The
hardware key is used to enable the feature and then is not required for future use.
MDO4SA3 Add integrated spectrum analyzer with input frequency range of 9 kHz–3 GHz.
One-time, permanent upgrade to any model. This upgrade requires installation at a Tektronix service center
and requires an instrument calibration.
MDO4SA6 Add integrated spectrum analyzer with input frequency range of 9 kHz–6 GHz.
One-time, permanent upgrade to any model. This upgrade requires installation at a Tektronix service center
and requires an instrument calibration.
MDO3SEC Add enhanced instrument security to enable password protected control of turning on/off all instrument ports and
instrument firmware update functionality.
One-time, permanent upgrade to any model enabled through software option key. Software option key products
require that the instrument model and serial number be provided at the time of purchase. The software option key
is specific to the model and serial number combination.
Spectrum analyzer upgrade options
The spectrum analyzer maximum input frequency range can be upgraded from 3 GHz to 6 GHz. This upgrade
requires installation at a Tektronix service center and requires an instrument calibration.
MDO4SA3T6 3 GHz to 6 GHz spectrum analyzer upgrade for MDO4000C.