Datasheet

Datasheet
www.tektronix.com40
DPO4PWR Power Analysis Application Module. Enables quick and accurate analysis of power quality, switching loss,
harmonics, safeoperating area (SOA), modulation, ripple, and slew rate (dI/dt, dV/dt).
DPO4LMT Limit and Mask Testing Application Module. Enables testing against limit templates generated from “golden”
waveforms and mask testing using custom masks.
6
DPO4VID HDTV and Custom (nonstandard) Video Triggering and Video Picture Module.
MDO4TRIG Advanced RF Power Level Triggering Module. Enables the power level on the spectrum analyzer input to be used
as a source in the following trigger types: Pulse Width, Runt, Timeout, Logic, and Sequence.
Recommended accessories
Probes Tektronix offers over 100 different probes to meet your application needs. For a comprehensive listing of available
probes, please visit www.tektronix.com/probes.
TPP0500B 500 MHz, 10X TekVPI
®
passive voltage probe with 3.9 pF input capacitance
TPP0502 500 MHz, 2X TekVPI
®
passive voltage probe with 12.7 pF input capacitance
TPP0850 2.5 kV, 800 MHz, 50X TekVPI
®
passive high-voltage probe
TPP1000 1 GHz, 10X TekVPI
®
passive voltage probe with 3.9 pF input capacitance
TAP1500 1.5 GHz TekVPI
®
active single-ended voltage probe
TAP2500 2.5 GHz TekVPI
®
active single-ended voltage probe
TAP3500 3.5 GHz TekVPI
®
active single-ended voltage probe
TCP0030 120 MHz TekVPI
®
30 Ampere AC/DC current probe
TCP0150 20 MHz TekVPI
®
150 Ampere AC/DC current probe
TDP0500 500 MHz TekVPI
®
differential voltage probe with ±42 V differential input voltage
TDP1000 1 GHz TekVPI
®
differential voltage probe with ±42 V differential input voltage
TDP1500 1.5 GHz TekVPI
®
differential voltage probe with ±8.5 V differential input voltage
TDP3500 3.5 GHz TekVPI
®
differential voltage probe with ±2 V differential input voltage
THDP0200 ±1.5 kV, 200 MHz TekVPI
®
high-voltage differential probe
THDP0100 ±6 kV, 100 MHz TekVPI
®
high-voltage differential probe
TMDP0200 ±750 V, 200 MHz TekVPI
®
high-voltage differential probe
P5100A 2.5 kV, 500 MHz, 100X high-voltage passive probe
P5200A 1.3 kV, 50 MHz high-voltage differential probe
Accessories
TPA-N-PRE Preamplifier, 12 dB nominal Gain, 9 kHz –6 GHz
119-4146-00 Near field probe set, 100 kHz –1 GHz
119-6609-00 Flexible monopole antenna
TPA-N-VPI N-to-TekVPI adapter
077-0585-xx Service manual (English only)
TPA-BNC TekVPI
®
to TekProbe™BNC adapter
TEK-DPG TekVPI Deskew pulse generator signal source
067-1686-xx Power measurement deskew and calibration fixture
SignalVu-PC-SVE Vector Signal Analysis Software
TEK-USB-488 GPIB-to-USB adapter
ACD4000B Soft transit case
HCTEK4321 Hard transit case (requires ACD4000B)
RMD3000 Rackmount kit
6 ≥350 MHz bandwidth models are recommended for mask testing on telecomm standards >55 Mb/s. 1 GHz bandwidth models are recommended for
mask testing on high-speed (HS) USB.