Datasheet
MDO3000 Series Mixed Domain Oscilloscope
Available Upgrades
Upgrade
Feature
Option Description Upgrade Option Details
Module/
Software
Key
Add Instrument
Functions
MDO3AFG Adds arbitrary function generator to any MDO3000
One time, permanent upgrade to any mode.
Installed with a single-use application module
MDO3MSO
Adds 16 digital channels to a MDO3000; includes P6316 digital
probe and accessories
MDO3SA Increases input range of spectrum analyzer to 9kHz - 3 GHz
Add Protocol
Analysis
MDO3AERO MIL-STD-1553 serial bus triggering and analysis module
Application modules contain licenses to activate functions.
License usage is flexible:
Stay in the module
− Allows the module to be moved from one MDO3000
to another.
Transferred to the oscilloscope
− Allows the module to be removed and stored for
safekeeping.
Transferred back to the module for use in another
MDO3000.
− Transferring the license to an oscilloscope and
removing the module permits the use of more than
two applications simultaneously.
MDO3AUDIO Audio serial triggering and analysis module
MDO3AUTO Automotive serial triggering and analysis module (CAN, LIN)
MDO3COMP
Computer serial triggering and analysis module
(RS-232/422/485/UART bus support)
MDO3EMBD Embedded serial triggering and analysis module (I2C, SPI)
MDO3FLEX FlexRay serial triggering and analysis module
MDO3USB
USB2.0 (LS, FS) serial bus triggering and analysis and
(HS – 1GHz models only) analysis module
Add Power
Analysis or Limit
Testing
MDO3LMT Limit/mask test module
MDO3PWR Power measurement and analysis module
Upgrade
Bandwidth
MDO3BWxTy2 Bandwidth upgrade for 2-channel MDO3000 from x to y
Bandwidth upgrades
Installed with a software key code.
− Instrument model and serial number must be
provided at the time of upgrade purchase.
Up to 500 MHz can be performed in the field.
1 GHz require installation at a Tektronix Service Center.
New probes automatically shipped if the original probes
have insufficient bandwidth.
Software Key
MDO3BWxTy4 Bandwidth upgrade for 4-channel MDO3000 from x to y
Add Digital
Voltmeter
N/A
Add digital voltmeter to any MDO3000
(Included with product registration)
Unique software key provided upon registration.
Register at www.tektronix.com/mdo3register
Software Key
For Secure
Areas
MDO3SEC
Add password protected security to enable or disable all
communication ports and firmware upgrades to any MDO3000
Installed with a software key code.
− Instrument model and serial number must be
provided at the time of upgrade purchase.
Software Key
All upgrades can be added after purchase.
www.tektronix.com/mdo3000 4/2014 © Tektronix 48W-30148-1