User manual

Acquire the Sign
al
5. Push Configure and the appropriate side
menu choices.
Bus B1
LIN
Define
Inputs
Thresholds
Configure
B1 Label
LIN
Bus
Display
Event
Table
6. Push Bit Rate, and turn Multipu rpose a to
select from the list of predefined bit rates.
Alternativ
ely, you can set the bit rate to a
specific value. To do so, select Custom,and
then turn Multipurpo se b to set the bit rate
from 800 bp
s to 100,000 bps.
Bit Rate
(a)
19.2K bps
7. Push LIN Standard, and turn Multipurpose
a to selec
t the appropriate standard.
LIN
Standard
v1.x
8. Push Include Parity Bits with Id to select
whether or not to include parity bits.
Include
Parity Bits
with Id
On Off
FlexRay
Bus
To acquire data from a FlexRay bus, you need to also set up these items:
1. If you selected FlexRay , push Define
Inputs and the desired side menu choices.
Bus B1
FlexRay
Define
Inputs
Thresholds Bit Rate B1 Label
FlexRay
FlexRay
Bus
Display
Event
Table
2. A s appropriate, push the Threshold, Bit Rate,
Label, Bus Display and Event Table buttons
and set their corresponding parameter
values.
Audio Bus
To acquire data from an Audio bus, you need to also set up these items:
1. If you selected Audio, push Define Inputs
and the desired side menu choices.
Bus B
1
Audio
Define
Inpu
ts
Thre
sholds
Configure
B1 La
bel
RS-232
Bus
Display
Even
t
Table
76 MDO3000 Series Oscilloscopes User Manual