User manual

Analyze Wavefor
morTraceData
Search Description
Rise/Fall Tim
e
Search for ris
ing and/or falling edges that are >, <, =, or  a user specified time.
Bus
Parallel: Sea
rch for a binary or hex value.
I
2
C: Search for Start, Repeated Start, Stop, Missing Ack, Address, Data, or Address and
Data.
SPI: Search f
or SS Active, MOSI, MISO, or MOSI & MISO
RS-232, RS-422, RS-485, UART: Search for Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx
End of Packet, Tx Data, Rx Data, Tx Parity Error, Rx Parity Error.
CAN: Search
for Start of Frame, Type of Frame (Data, Remote, Error, Overload), Identi fier
(standard or extended), Data, Identifier and Data, End of Frame, or Missing Ack, Bit Stuffing
Error
LIN: Searc
h for Synch, Identifier, D ata, ID & Data, Wakeup Frame, Sleep Frame, Error
FlexRay: Search for Start of Frame, Type of Frame, Identifier, Cycle Count, H eader Fields,
Data, ID & Data, End of Frame, Error
Audio: Sea
rch for Word Select or Data
USB: Search for Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet,
Data Packet, Handshake Packet, Special Packet, or Error
MIL-STD-
1553: Search for Sync, Command, Status, Data, Time (RT/IMG), Error
152 MDO3000 Series Oscilloscopes User Manual