Declaration of conformity

Compliance demonstrated using high quality, shielded interface cables.
≤ 3.0 division waveform displacement or ≤ 6.0 division increase in peak-to-peak noise in Ch 1 to Ch 4 is allowed when the
instrument is subjected to fields and signals as defined in the IEC 61000-4-3 and IEC 61000-4-6 tests.
Residual spurious signals in the RF section can typically increase to -50 dBm when the instrument is subjected to
electromagnetic interference per the IEC 61000-4-3 test for frequencies up to 1 GHz, and to -35 dBm for frequencies above 1
GHz.
Residual spurious signals in the RF section can typically increase to -85 dBm when the instrument is subjected to
electromagnetic interference per the IEC 61000-4-6 test.
If the instrument powers down upon a voltage interruption it will take longer than ten seconds to reboot.
Earl Thompson, Senior Vice President & General Manager, Time Domain Business Unit, Tektronix, Inc.
Martin Baggs, Compliance Manager, Tektronix, Inc.
Send compliance inquiries to:
Tektronix, Inc.
Product Compliance Engineering
PO Box 500, MS/19-045
Beaverton, OR 97007 USA
European Union
Tektronix UK Ltd
Western Peninsula, Western Road
Bracknell RG12 1RF, United Kingdom
Australia / New Zealand
Baker & McKenzie
Level 27, AMP Centre, 50 Bridge Street
Sydney NSW 2000, Australia