User manual

Warranted Characteristics
Specifications
1Ć10
TableĂ1Ć10:ăWarranted Characteristics Ċ Vertical Deflection System (Cont.)
Name Description
TAS 455 Bandwidth at the BNC input
and probe tip, using the StandardĆAcĆ
cessory Probe
60 MHz.
TAS 465 Bandwidth at the BNC input 100 MHz.
TAS 465 Bandwidth at the probe tip,
using the Standard Accessory Probe
The limits are as follows:
u
sing the Standard
Ć
Accessor
y
Probe
Condition Bandwidth
+15_ Cto+35_C 100 MHz.
-10_ Cto+15_C and
+35_ Cto+55_C
90 MHz.
Lower Frequency Limit, AC Coupled 10 Hz with 1X probe.
The AC Coupled Lower Frequency Limits are reduced by a factor of
10 when 10X, passive probes are used.
TAS 455 Crosstalk (Channel Isolation) 50 dB at 10 MHz, 35 dB at 60 MHz.
TAS 465 Crosstalk (Channel Isolation) 50 dB at 10 MHz, 35 dB at 100 MHz.
Delay Between Channels, Full BandĆ
width
200 ps between channels 1 and 2 for equal volts/div and coupling
settings.
CommonĆmode Rejection Ratio
(CMRR)
10:1 at 50 MHz.
Trace Shift The limits are as follows:
Condition Allowable Trace Shift
Changing volts/div settings <±(0.1 division + 0.2 mV).
Selecting invert 0.5 division.
Changing from bandwidth limit
to full bandwidth
0.1 division.
Maximum Input Voltage ±400 V (DC + peak AC); derate at 20 dB/decade from 100 kHz to
13 V at 3 MHz.
Low Frequency Linearity Within ±5%.