Datasheet

Performance Verification
Equipment Setu
p
Procedure
1. Connect the equipment as shown.
2. Power on the instruments. Wait at least 20 minutes.
3. On the Microwave Signal Generator:
a. Set the Output to OFF.
b. Set th
e frequency to 300 MHz.
c. Set the output level to at least +10 dBm, not to exceed +13 dBm (2.8 V
p-p
).
d. Turn the Output On.
FCA3000, FCA3100, and MCA3000 Series Specifications and Performance Verification 2–21