Datasheet

Performance Verification
Table 2-1: Recommended Equipment (cont.)
Equipment Requirements Exam ple
Adapter
2.92 mm male to N female
Low frequency requirement
Fairview Microwave SM3130
Adapter
Type N m ale to BNC female
4GHz
Fairview Microwave SM3510
Adapter (Qty 2) 2.92 male to SMA female connector
40 GHz operation
Fairview Microwave SM3285
Adapter (Qty 2)
2.92 male to 2.92 male connector
40 GHz operation
Fairview Microwave SM3242
Cable (Qty 2) SMA male to BNC male
Tektronix part number 174-3998-XX
Cable (Qty 2) Coaxial c able, BNC male to B NC male
Tektronix part number 012-0117-X X
Cable Coaxial cable, BNC m ale to BNC female
Tektronix part number 012-0104-XX,
18 inch, or Pomona 4524-C-36,
36 inch
Cable SMA male to SMA male cable
Tektronix part number 174-5401-XX
Cable 1 m cable with 2.92 m m male and female connector Huber & Sohner
84119347–SF102/115K/215K/1.0M
Termination
Coaxial BNC feedthrough terminator, 50 Ω,2W
Tektronix part number 011-0049-X X
Attenuator (Qty 2) 50 Ω 10X attenuator, ±5% accuracy
Tektronix part number 011-0059-X X
The
se procedures cover all FCA3000, FCA3100, and MCA3000 series models.
Please ignore c hecks that do not apply to the specifi c model that you are testing.
Ph
otocopy the test record and use it to record the performance test results for
your instrument.
A
s an alternative, you can access an Excel spreadsheet by clicking on the
paperclip icon, at the left. This spreadsheet form of the test record will perform
some of the necessary calculations for you.
1. Double-click on the paperclip icon, to the left.
2. Select File > S ave As in the spreadsheet File menu, and save it to a convenient
place on your desktop.
3. When you perform the Front End Characteristics procedure, enter the
measured values o n the yellow Front End Characteristics tab. Calculated
values will automatically be added to the Test Record tab.
2–2 FCA3000, FCA3100, and MCA3000 Series Specifications and Performance Verification