Datasheet

Specifications
Table 1-8: Software functions (cont.)
Characteristic
Description
Modes
Start, Stop, Start and Stop Arming
Input Channels A, B, or E (rear panel)
Maximum Repetition Rate for
Arming Signal
Channel A , B: 160 MHz
Channel E: 80 MHz
Start Time Delay Range FCA3000 Series: 20 ns to 2 s, 10 ns resolution.
MCA3000 Series: 10 ns to 2 s, 10 ns resolution
Mathematics Functions
(K*X+L)/M
(K/X +L)/M
Where:
X is current reading
K, L, and M are constants
Constants set by keyboard or as frozen reference value (X
6
)
Mathematics Functions; Stored
Instrument Setups
20 (10 can be user protected)
Instrument setups are saved/recalled from internal nonvolatile memory
Mathematics, Other Functions;
Number of Displayed Digits
14 digits in numerical mode
Table 1-9: Power
Characteristic
Description
Line Power
100 – 240 V
AC
±10%, CAT II: 50 – 400 Hz ±10%: 40 W
Fuse Rating
No customer accessible fuse
Table 1-10: I/O connectors
Characteristic
Description
GPIB Interface Included IEEE488.2 - 1987 Interface
Functions
All front panel accessible controls
Modes
Native Agilent 53131/132/181 command emulation. Timing and resolution not compatible
Interface Functions SH1, AH1, T6, L4, SR1, RL1, DC1, DT1, E2
Measurement Rate, FCA3000
Series
To GPIB: 2000 readings/s block, 350 readings/s individual, 4000 readings/s talker only
To Internal Memory: 250K readings/s
Internal memory size: up to 750K readings
Measurement R ate,
FCA30xx/MCA30xx
To GPIB: 13,900 readings/s block, 650 readings/s individual, 4000 readings/s talker only
To Internal Memory: 250K readings/s, 100K readings/s with calibration on
Internal memory size: Up to 3.9 M readings with calibration off
USB Interface USB2.0, full speed
Classes USBTMC USB488 subclass
FCA3000, FCA3100, and MCA3000 Series Specifications and Performance Verification 1–15