Datasheet

ManualsBrandsTektronix ManualsOscilloscope ModulesFlexRay, CAN, LIN trigger, DPO/MSO4000B

Actions on test complete Trigger out pulse, set remote interface SRQ

Results display Test status, total waveforms, number of violations, violation rate, total tests, failed tests, test failure rate, elapsed time, total hits for

each mask segment

Software

OpenChoice

Desktop Enables fast and easy communication between a Windows PC and your oscilloscope using USB or LAN. Transfer and save

settings, waveforms, measurements, and screen images. Included Word and Excel toolbars automate the transfer of acquisition

data and screen images from the oscilloscope into Word and Excel for quick reporting or further analysis.

IVI driver Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI,

Microsoft .NET, and MATLAB.

e*Scope

Web-based remote

control

Enables control of the oscilloscope over a network connection through a standard web browser. Simply enter the IP address or

network name of the oscilloscope and a web page will be served to the browser. Transfer and save settings, waveforms,

measurements, and screen images or make live control changes to settings on the oscilloscope directly from the web browser.

LXI Class C Web interface Connect to the oscilloscope through a standard Web browser by simply entering the oscilloscope's IP address or network name in

the address bar of the browser. The Web interface enables viewing of instrument status and configuration, status and modification

of network settings, and instrument control through the e*Scope Web-based remote control. All Web interaction conforms to LXI

Class C specification, version 1.3.

Display system

Display type 10.4 in. (264 mm) liquid-crystal TFT color display

Display resolution 1,024 horizontal × 768 vertical pixels (XGA)

Interpolation Sin(x)/x

Waveform styles Vectors, Dots, Variable Persistence, Infinite Persistence.

Graticules Full, Grid, Cross Hair, Frame, IRE and mV.

Format YT and simultaneous XY/YT

Maximum waveform capture rate >340,000 wfms/s in FastAcq acquisition mode on 1 GHz models

>270,000 wfms/s in FastAcq acquisition mode on 100 MHz - 500 MHz models

>50,000 wfms/s in DPO acquisition mode on all models.

Input/output ports

USB 2.0 high-speed host port Supports USB mass storage devices and keyboard. Two ports on front and two ports on rear of instrument.

USB 2.0 device port Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488), and

direct printing to all PictBridge-compatible printers.

Printing Print to network printer, PictBridge printer, or to a printer that supports e-mail printing. Note: This product includes software

developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)

LAN port RJ-45 connector, supports 10/100/1000 Mb/s

Video out port DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector. XGA resolution.

Mixed Signal Oscilloscopes — MSO4000B, DPO4000B Series

Limit/Mask testing (optional)