Datasheet

ManualsBrandsTektronix ManualsOscilloscope ModulesHDTV, Custom video trigger

Digital Phosphor Oscilloscopes

MSO3000 Series, DPO3000 Series Data Sheet

Features & Beneﬁts

Key Performance Speciﬁcations

500, 300, 100 MHz Ba ndwidth Models

2 an d 4 Analog Channe l Models

16 Digital Channels (MSO Series)

2.5 GS/s Sample Rate on All Channels

5 Mega point Record Length on All Channels

>50,000 wfm/s Maximum Waveform Capture Rate

Suite of Adva nced Triggers

Ease of Use Features

Wave Inspector

Controls Provide Easy Navigation and Automated

Search of Waveform Data

29 Automated Measurements, and FFT Analys

is for Simpliﬁed

Waveform Analysis

TekVPI

Probe Interface Supports Active, Differential, and Current

Probes for Automatic Scaling and Units

9 in. (229 mm) WVGA Widescreen Color Display

Small Footprint and Lightweight – Only 5.8 in. (147 mm) deep and 9 lb.

(4 kg)

Connectivity

USB 2.0 Host Port on both the Front Panel and Rear Panel for Quick and

Easy Data Storage, Printing, and Connecting a USB Keyboard

USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or

Direct Printing to a PictBridge

-compatible Printer

Integrated 10/100 Ethernet Port for Network Connection and Video Out

Port to Export the Oscilloscope Display to a Monitor or Projector

Optional Serial Triggering and Analysis

Automated S

erial Triggering, Decode, and Search Options for I

C, SPI,

CAN, LIN, RS-232/422/485 /UART, and I

S/LJ/RJ/TDM

Mixed Signal Design and Analysis (MSO Series)

Automated Triggering, Decode, and Search on Parallel Buses

Multichannel Setup and Hold Triggering

MagniVu™ High-speed Acquisition Provides 121.2 ps Fine Timing

Resolution on Digital Channels

Optional Application Support

Power Ana

lysis

HDTV and Custom Video Ana lysis

Feature-rich Tools for Debug ging Mixed

Signal Designs

With the M

SO/DPO3000 Oscilloscope Series, you can visualize analog,

digital, and serial signals with a single instrument to quickly ﬁnd and

diagnose problems in complex embedded system designs. Bandwidths up

to 500 MHz and a m inimu m of 5x oversampling on all channels provides

the performance needed for many of today’s mainstream applications. A

deep record length of up to 5 Mpoints is standard on all channels, enabling

you to ca

pture long wind ows of signal activity while maintaining ﬁne timing

resolution.

With Dig

ital Phosphor technology for fast visualization of signal anomalies,

Wave Inspector

controls for rapid w aveform navigation, and automated

serial bus and power analysis, the MSO/DPO3000 Oscilloscope Series from

Tektronix provides the feature-rich tools you need to simplify and speed

debug of your complex design.

Summary of content (18 pages)

PAGE 1
Digital Phosphor Oscilloscopes MSO3000 Series, DPO3000 Series Data Sheet Connectivity USB 2.0 Host Port on both the Front Panel and Rear Panel for Quick and Easy Data Storage, Printing, and Connecting a USB Keyboard USB 2.
PAGE 2
Data Sheet Discover – Fast waveform capture rate - over 50,000 wfm/s - maximizes the probability of capturing elusive glitches and other infrequent events. Comprehensive Features Speed Every Stage of Debug The MSO/DPO3000 Series offers a robust set of features to speed every stage of debugging your design – from quickly discovering an anomaly and capturing it, to searching your waveform record for the event and analyzing its characteristics and your device’s behavior.
PAGE 3
Digital Phosphor Oscilloscopes — MSO3000 Series, DPO3000 Series Search – I2C decode showing results from a Wave Inspector search for Address value 50. Wave Inspector controls provide unprecedented efficiency in viewing and navigating waveform data. Search Finding your event of interest in a long waveform record can be time consuming without the right search tools.
PAGE 4
Data Sheet Wave Inspector controls provide unprecedented efficiency in viewing, navigating, and analyzing waveform data. Zip through your 5 Mpoint record by turning the outer pan control (1). Get from the beginning to end in seconds. See something of interest and want to see more details? Just turn the inner zoom control (2). Search step 1: You define what you would like to find. Wave Inspector® Navigation and Search A 5 Mpoint record length represents thousands of screens of information.
PAGE 5
Digital Phosphor Oscilloscopes — MSO3000 Series, DPO3000 Series Digital phosphor technology enables greater than 50,000 wfm/s waveform capture rate and real-time intensity grading on the MSO/DPO3000 Series. The MSO Series provides 16 integrated digital channels enabling you to view and analyze time-correlated analog and digital signals. Digital Phosphor Technology The MSO/DPO3000 Series’ digital phosphor technology provides you with fast insight into the real operation of your device.
PAGE 6
Data Sheet White edges indicate additional information is available by zooming in. As shown here, zooming in on the white edge reveals a hidden glitch. The P6316 MSO probe offers two eight-channel pods to simplify connecting to your device. Once a group is formed, you can position all the channels contained in that group collectively. This greatly reduces the normal setup time associated with positioning channels individually. The MagniVu high-resolution record provides 121.
PAGE 7
Digital Phosphor Oscilloscopes — MSO3000 Series, DPO3000 Series Triggering on a specific data packet going across an I2C bus. The yellow waveform is clock and the blue waveform is data. A bus waveform provides decoded packet content including Start, Address, Read/Write, Data, and Stop. Serial Triggering and Analysis (Optional) On a serial bus, a single signal often includes address, control, data, and clock information. This can make isolating events of interest difficult.
PAGE 8
Data Sheet Safe operating area measurement. Automated power measurements enable quick and accurate analysis of common power parameters. Viewing an NTSC video signal. Notice the intensity-graded view provided by the DPO’s ability to represent time, amplitude, and distribution of amplitude over time.
PAGE 9
Digital Phosphor Oscilloscopes — MSO3000 Series, DPO3000 Series The MSO/DPO3000 is designed to make your work easier. The large, high-resolution display shows intricate signal details. Dedicated front-panel controls simplify operation. A USB host port on the front panel allows you to easily transfer screenshots, instrument settings, and waveform data to a memory stick. The MSO/DPO3000 Series’ compact form factor frees up valuable space on your bench or desktop.
PAGE 10
Data Sheet NI LabVIEW SignalExpress™ Tektronix Edition is a fully interactive measurement acquisition and analysis software developed jointly with National Instruments and optimized for the MSO/DPO Series. Extended Analysis Acquiring data and measurements from the MSO/DPO3000 Series is as simple as connecting a USB cable from the oscilloscope to your PC.
PAGE 11
Digital Phosphor Oscilloscopes — MSO3000 Series, DPO3000 Series Characteristics Vertical System Analog Channels Characteristic MSO3012 DPO3012 MSO3014 DPO3014 MSO3032 DPO3032 MSO3034 DPO3034 MSO3054 DPO3054 2 100 MHz 3.5 ns 4 100 MHz 3.5 ns 2 300 MHz 1.17 ns 4 300 MHz 1.
PAGE 12
Data Sheet Trigger System Trigger Sensitivity Characteristic Description Characteristic Description Main Trigger Modes Auto, Normal, and Single Internal DC Coupled Trigger Coupling DC, AC, HF reject (attenuates >50 kHz), LF reject (attenuates <50 kHz), noise reject (reduces sensitivity) 0.
PAGE 13
Digital Phosphor Oscilloscopes — MSO3000 Series, DPO3000 Series Acquisition Modes Waveform Math Mode Description Characteristic Description Sample Acquire sampled values. Arithmetic Add, subtract, multiply, and divide waveforms. Peak Detect Captures glitches as narrow as 2 ns at all sweep speeds. Math Functions Integrate, Differentiate, FFT. FFT Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris.
PAGE 14
Data Sheet Display Characteristics Physical Characteristics Characteristic Description Dimensions mm in. Display Type 9 in. (228.6 mm) wide format liquid crystal TFT color display. Display Resolution 800 horizontal × 480 vertical pixels (WVGA). Height Width Depth 203.2 416.6 147.3 8 16.4 5.8 Waveform Styles Vectors, Dots, Variable Persistence, Infinite Persistence. Graticules Full, Grid, Cross Hair, Frame, IRE and mV. Format YT and XY. Maximum Waveform Capture Rate >50,000 wfm/s.
PAGE 15
Digital Phosphor Oscilloscopes — MSO3000 Series, DPO3000 Series Ordering Information DPO3000 Models Application Modules Product Description Modules Description DPO3012 100 MHz, 2.5 GS/s, 5M record length, 2-channel digital phosphor oscilloscope DPO3AUDIO DPO3014 100 MHz, 2.5 GS/s, 5M record length, 4-channel digital phosphor oscilloscope DPO3032 300 MHz, 2.5 GS/s, 5M record length, 2-channel digital phosphor oscilloscope Audio Serial Triggering and Analysis Module.
PAGE 16
Data Sheet Instrument Options Power Plug Options Recommended Probes Probe Description TAP1500 1.5 GHz TekVPI® active voltage probe. TAP1500X2 Bundle of Two 1.5 GHz Active Probes, single ended with TekVPI Interface. TDP0500 500 MHz TekVPI differential voltage probe with ±42 V differential input voltage. TDP1000 1 GHz TekVPI differential voltage probe with ±42 V differential input voltage. 120 MHz TekVPI 30 Ampere AC/DC current probe. Option Description Opt. A0 North America Opt.
PAGE 17
Digital Phosphor Oscilloscopes — MSO3000 Series, DPO3000 Series www.tektronix.
PAGE 18
Data Sheet Contact Tektronix: ASEAN / Australasia (65) 6356 3900 Austria +41 52 675 3777 Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 07 81 60166 Brazil +55 (11) 40669400 Canada 1 (800) 661-5625 Central East Europe, Ukraine, and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France +33 (0) 1 69 86 81 81 Germany +49 (221) 94 77 400 Hong Kong (852) 2585-6688 India (91) 80-42922600 Italy +39 (02) 25086 1 Japan