Datasheet

DPO3COMP Computer Serial Triggering and Analysis Module. Enables triggering on packet-level information on RS-232/422/485/UART buses
as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables
with time stamp information.
Signal Inputs - Any Ch1 - Ch4 (and any D0 - D15 on MSO models; single-ended probing only)
Recommended Probing - RS-232/UART: Single ended; RS-422/485: Differential
DPO3EMBD Embedded Serial Triggering and Analysis Module. Enables triggering on packet-level information on I
2
C and SPI buses as well as
analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time
stamp information. Only two-wire SPI support available on DPO3012, DPO3032, and DPO3052 models.
Signal Inputs - I
2
C: Any Ch1 - Ch4 (and any D0 - D15 on MSO models); SPI: Any Ch1 - Ch4 (and any D0 - D15 on MSO models)
Recommended Probing - I
2
C, SPI: Single ended
DPO3FLEX FlexRay Serial Triggering and Analysis Module. Enables triggering on packet-level information on FlexRay buses as well as
analytical tools such as digital views of the signal, bus views, packet decoding, search tools, packet decode tables with time-stamp
information.
Signal Inputs - Any Ch1 - Ch4 (and any D0 - D15 on MSO models; single-ended probing only)
Recommended Probing - Single ended or differential
DPO3PWR Power Analysis Module. Enables quick and accurate analysis of power quality, switching loss, harmonics, safe operating area
(SOA), modulation, ripple, and slew rate (dI/dt, dV/dt).
DPO3VID HDTV and Custom (nonstandard) Video Triggering Module.
Instrument options
Bandwidth upgrades
Bandwidth is fully upgradable (up to 500 MHz) on any MSO/DPO3000 Series oscilloscope. Instruments with serial numbers starting with C02 or B02 are upgraded with a
software option key. Instruments with serial numbers starting with C01 or B01 must be upgraded at an authorized Tektronix service center.
DPO3BW1T32 Bandwidth upgrade from 100 MHz to 300 MHz for an MSO/DPO3012
DPO3BW1T34 Bandwidth upgrade from 100 MHz to 300 MHz for an MSO/DPO3014
DPO3BW1T52 Bandwidth upgrade from 100 MHz to 500 MHz for an MSO/DPO3012
DPO3BW1T54 Bandwidth upgrade from 100 MHz to 500 MHz for an MSO/DPO3014
DPO3BW3T52 Bandwidth upgrade from 300 MHz to 500 MHz for an MSO/DPO3012 or an MSO/DPO3032
DPO3BW3T54 Bandwidth upgrade from 300 MHz to 500 MHz for an MSO/DPO3014 or an MSO/DPO3034
Power cord and plug options
Opt. A0 North America power plug (115 V, 60 Hz)
Opt. A1 Universal Euro power plug (220 V, 50 Hz)
Opt. A2 United Kingdom power plug (240 V, 50 Hz)
Opt. A3 Australia power plug (240 V, 50 Hz)
Opt. A5 Switzerland power plug (220 V, 50 Hz)
Opt. A6 Japan power plug (100 V, 110/120 V, 60 Hz)
Opt. A10 China power plug (50 Hz)
Opt. A11 India power plug (50 Hz)
Opt. A12 Brazil power plug (60 Hz)
Opt. A99 No power cord
Datasheet
18 www.tektronix.com