Datasheet

Input/output ports

USB 2.0 high-speed host port Supports USB mass storage devices, printers, and keyboards. One port available on rear panel and one on front panel.

LAN port (Ethernet) RJ-45 connector, supports 10/100BASE-T.

GPIB interface Available as an optional accessory that connects to the USB Device and USB Host port with the TEK-USB-488 GPIB to USB

Adapter. The control interface is incorporated in the instrument user interface.

Video out port DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector. SVGA resolution.

Auxiliary input Front-panel BNC connector. Input Impedance 1 MΩ. Max input 300 V

RMS

CAT II with peaks ≤ ±425 V.

Probe compensator output voltage

and frequency

Front-panel pins

Amplitude 0 to 2.5 V

Frequency 1 kHz

Trigger out Rear-panel BNC connector, provides a negative-polarity pulse when the oscilloscope triggers.

Kensington-style lock Rear-panel security slot connects to standard Kensington-style lock.

Power source

Power source voltage 85 to 265 V ±10%

Power source frequency 45 to 440 Hz (85 to 265 V)

Power consumption 120 W maximum

Optional TekVPI

external power

supply

Output voltage 12 V

Output current 5 A

Power consumption 50 W

Physical characteristics

Dimensions

in.

Height 203.2 8

Width 416.6 16.4

Depth 147.3 5.8

Weight

lb.

Net 4.17 9.2

Shipping 8.62 19

Rackmount configuration 5U

Cooling clearance 2 in. (51 mm) required on left side and rear of instrument

Required when total oscilloscope probe power usage exceeds 20 W.

MSO3000 Series and DPO3000 Series Mixed Signal Oscilloscopes