Datasheet

ManualsBrandsTEKTRONIX ManualsTest & Measurement AccessoriesCompatible with DPO2000/MSO2000 series

Features & Benefits

Key Performance

Specifications

– 100 MHz and 200 MHz bandwidth

models

– 2 or 4 analog channels

– 16 digital channels (MSO2000 Series)

– Sample rates up to 1 GS/s on

all channels

– 1 Mega sample record length on

all channels

– 5,000 wfm/s maximum waveform

capture rate

– Suite of advanced triggers

Serial Bus Trigger and

Decode

– I

C, SPI, CAN, LIN, and RS-232/

422/485/UART serial triggering,

decode, and analysis options

Ease of Use Features

– Wave Inspector

Navigation and

Search provides unprecedented

efficiency in waveform analysis

– FilterVu

variable low-pass filter

allows for removal of unwanted

signal noise while still capturing

high-frequency events

– 7 in (180 mm) bright, widescreen,

TFT-LCD color display

– USB 2.0 on front panel for quick

and easy data storage

– USB 2.0 device port on rear panel

for direct PC control of oscilloscope

using USBTMC or direct printing to

any PictBridge

compatible printer

– Plug ‘n’ Play PC connectivity

and analysis software solutions

– TekVPI

Probe Interface supports

active, differential, and current probes

for automatic scaling and units

– Small footprint and light weight -

only 5.3 in (134 mm) deep and 7 lb

14 oz (3.6 kg)

Mixed Signal Design and

Analysis (MSO2000 Series)

– Ability to time correlate up to 4

analog and 16 digital channels

– Parallel bus trigger and analysis

– Multichannel setup and hold triggering

– Next-generation digital waveform

display

Applications

– Embedded design and debug

– Mixed signal design and debug

– Power measurements

– Automotive electronics

– Education and training

– Video design and debug

Digital Phosphor Oscilloscopes

MSO2000 Series • DPO2000 Series

The Power to Solve Problems Quickly -

The MSO2000 and DPO2000 Series

digital phosphor oscilloscopes (DPOs)

deliver the performance and tools you

need to visualize your signals and find

answers quickly. The DPO2000 Series

are the first oscilloscopes to provide

1 M points of usable record length on

all channels, serial trigger and decode

analysis options, a variable low-pass

filter that also allows you to see signal

details to the oscilloscope’s full band-

width and all in a compact form factor.

The MSO2000 Series adds 16 integrated

digital channels, enabling you to visualize

and time correlate analog and digital

signals on a single instrument. This inte-

gration extends triggering functionality

across all 20 channels - which is ideal

for debugging mixed analog and

digital designs.

Designed to Make

Your Work Easier

Wave Inspector

Navigation and Search

Imagine trying to efficiently use the

Internet if search engines such as

Google and Yahoo didn’t exist and

Web browser features such as Favorites

and Links didn’t exist. Now you know

how most modern oscilloscope users

feel when trying to use the long record

length in their digital oscilloscope.

Record length, one of the key specifi-

cations of an oscilloscope, is the number

of samples it can digitize and store in

a single acquisition. The longer the

record length, the longer the time

window you can capture with high

timing resolution (high sample rate).

The first digital oscilloscopes could

capture and store only 500 points,

which made it very difficult to acquire

all relevant information around the event

being investigated. Over the years,

oscilloscope vendors have provided

longer and longer record lengths to

meet market demands for long capture

windows with high resolution. These

mega-point record lengths often

represent thousands of screens worth

of signal activity. While standard record

lengths have increased greatly over

Tektronix MSO2000 and DPO2000 Series Digital Phosphor Oscilloscopes

Feature-Rich Tools for Debugging Mixed Signal Designs.

Digital phosphor technology enables 5,000

waveforms/second waveform capture and

real-time intensity grading on the MSO2000

and DPO2000 Series.

Summary of content (11 pages)

PAGE 1
Digital Phosphor Oscilloscopes MSO2000 Series • DPO2000 Series Features & Benefits Key Performance Specifications – 100 MHz and 200 MHz bandwidth models – 2 or 4 analog channels – 16 digital channels (MSO2000 Series) – Sample rates up to 1 GS/s on all channels – 1 Mega sample record length on all channels – 5,000 wfm/s maximum waveform capture rate – Suite of advanced triggers Serial Bus Trigger and Decode – I2C, SPI, CAN, LIN, and RS-232/ 422/485/UART serial triggering, decode, and analysis options Tektro
PAGE 2
Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series A001_7738.tif Search step 1: You define what you would like to find. Wave Inspector controls provide unprecedented efficiency in viewing, navigating, and analyzing waveform data. Zip through your 1 M point record by turning the outer pan control (2). Get from the beginning to end in seconds. See something of interest and want to see more details? Just turn the inner zoom control (1).
PAGE 3
Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series A001_7744.tif MSO/DPO2000 triggered on a specific data packet going across an I2C bus. No more counting clock edges and 1s and 0s. A Bus waveform provides decoded packet content including Start, Address, Read/Write, Data, and Stop. And the addition of timing waveforms makes it easy to quickly determine values of two signals. See the MSO/DPO2000 Series in action for yourself. Try out the MSO/DPO2000 Virtual Oscilloscope at: www.tektronix.
PAGE 4
Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series A001_7749.tif Microprocessors, FPGAs, Analog-toDigital Converters (ADCs), and Digitalto-Analog Converters (DACs) are all examples of ICs that present unique measurement challenges in today’s embedded designs. The MSO2000 Series Mixed Signal Oscilloscopes offer the addition of 16 digital channels.
PAGE 5
Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series A001_7750.tif OpenChoice® Desktop - Standard software seamlessly connects the oscilloscope to a PC. PC Connectivity and USB Data Storage The MSO2000 and DPO2000 Series provides flexibility in data transfer with standard USB host and device ports which enable removable data storage, seamless PC connectivity, and direct printing. Also available are optional GPIB, LAN, and Video-Out adaptors.
PAGE 6
Digital Phospor Oscilloscopes Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series MSO2000 Series • DPO2000 Series 8 3 1 Zoom/Pan – Dedicated front panel controls for zooming and panning. Get from the start to the end of your 1 M record in seconds. The inner control adjusts the zoom factor while the outer ring adjust pans the zoom box across the waveform. Navigating your waveform has never been easier.
PAGE 7
Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series Characteristics Vertical System - Analog Channels Vertical System Analog Channels MSO2012 DPO2012 Input Channels 2 Analog Bandwidth*1 (-3 dB) 100 MHz Calculated Rise Time 3.
PAGE 8
Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series Acquisition Modes Trigger Modes Waveform Measurements Sample – Acquires sampled values. Peak Detect – Captures glitches as narrow as 3.5 ns at all sweep speeds. Averaging – From 2 to 512 waveforms included in average. Roll – Scrolls waveforms right to left across screen at sweep speeds slower than or equal to 40 ms/div. Edge – Positive or negative slope on any channel or front-panel auxiliary input.
PAGE 9
Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series Display Characteristics Display Type – 7 in (180 mm) liquid crystal TFT color display. Display Resolution – 480 horizontal x 234 vertical pixels (WQVGA). Waveform Styles – Vectors, Dots (In Video Trigger mode), Variable Persistence, Infinite Persistence. Graticules – Full, Grid, Cross Hair, Frame. Format – YT and XY. Waveform Capture Rate – Up to 5,000 wfms/sec. Input/Output Ports USB 2.
PAGE 10
Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series Recommended Serial Bus Application Modules DPO2EMBD– Embedded Serial Triggering and Analysis Module. Enables triggering on packet level information on I2C and SPI buses as well as analytical tools such as bus views, packet decoding, search tools, and packet decode tables with timestamp information. DPO2COMP– Computer Serial Triggering and Analysis Module.
PAGE 11
Digital Phospor Oscilloscopes MSO2000 Series • DPO2000 Series Contact Tektronix: ASEAN / Australasia (65) 6356 3900 Austria +41 52 675 3777 Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 07 81 60166 Brazil & South America (11) 40669400 Canada 1 (800) 661-5625 Central East Europe, Ukraine and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France +33 (0) 1 69 86 81 81 Germany +49 (221) 94 77 400 Hong Kong (852)