Datasheet

TEK.COM 17
DMM7512 Dual Channel 7½-Digit Sampling Multimeter
Language Embedded Test Script Processor (TSP) accessible from any host interface; responds to high-speed
test scripts comprised of remote commands and statements (for example, branching, looping, math);
able to execute high-speed test scripts stored in memory without host intervention; also SCPI (default
command set).
Expansion Interface The TSP-Link expansion interface allows TSP-enabled instruments to trigger and communicate with each
other. See the figure below.
The DMM7512 has four TSP-Link connectors (two on each module) to make it easier to connect
instruments in a sequence.
• Once instruments are interconnected through the TSP-Link expansion interface, a computer can
access all of the resources of each source measure instrument through the host interface of any
TSP-Link instrument.
• A maximum of 32 TSP-Link nodes can be interconnected. Each source-measure module uses one
TSP-Link node.
IP configuration Static or DHCP (manual or automatic).
Ordering Information
DMM7512 Dual Channel 7 ½-Digit Sampling Multimeter
Supplied Accessories
012178100 Test Lead Kit, Quantity 4
CA-18-16A LAN Crossover Cable, 40 cm (16 in), quantity 2
17471070 0 Shielded Crossover Cable with RJ-45 Connector, 1.5 m (5 ft), quantity 1
CA-568-120A Green and Yellow Ground Cable, 3.0 m (120 in), quantity 1
4299-13 1U High Fixed Rack Mount Kit, quantity 1
0713411 Safety Precautions Document
071357600 DMM7512 7½-Digit Multimeter Instrument Information
Instruction Manuals/Documentation (available at www.tek.com/DMM7512)
DMM7510 7.5 Digit Graphical Sampling Multimeter Reference Manual
DMM7510 7.5 Digit Graphical Sampling Multimeter User’s Manual
Software and Drivers (available at tek.com)
IVI/VISA Drivers for Microsoft
®
Visual Basic
®
, Visual C/C++
®
Keithley Test Script Builder available at https://www.tek.com/keithley-test-script-builder