Datasheet

Datasheet
TEK.COM16
General Instrument Specifications
Input Protection 1010 V DC all ranges and functions on HI and LO terminals; 350 V all ranges and functions on sense HI,
sense LO terminals; 250 V rated current input terminal; fused 3 A range; current input terminals protected
to 1 kV.
3 A Input Fuse Protection 3.5 A, 1 kV fast blow type; Keithley part number DMM7510-FUSE-3A.
Common Mode Isolation 500 VDC or ACV
PEAK
LO to chassis. All terminals >10 GΩ, <350 pF any terminal to chassis.
Power Line Universal input, 100 V to 240 V.
Line Frequency 50 Hz or 60 Hz, automatically sensed at power-up.
Power Consumption 165 VA.
Operating Environment Specified for 0 °C to 50 °C, ≤70% relative humidity up to at 35 °C; derate 3% relative humidity per °C,
35 °C to 50 °C.
Storage Environment –25 °C to 65 °C.
Altitude Maximum 2000 m (6562 ft) above sea level.
Pollution Degree 2.
Real Time Clock Lithium battery backup (3+ years battery life).
EMC Conforms to European Union EMC Directive.
Safety NRTL listed to UL61010-1 and CSA C22.2 No 61010-1; conforms with European Union Low
Voltage Directive.
Vibration MIL-PRF-28800F Class 3, Random.
Warm-up 4 hours to rated accuracy.
Input Signal Connections Rear safety banana jacks.
Cooling Forced air, side intake, and rear exhaust.
Dimensions Rack Mount: 44 mm high × 483 mm wide × 696 mm deep (1.7 in. × 19 in. × 27.41 in.)
Shipping Weight 11.3 kg (25.0 lb.).
Digital I/O
Connector 9-pin female D.
5V Power Supply Pin Limited to 500 mA at >4 V (solidstate fuse protected).
Lines Six input/output, user-defined, for digital I/O or triggering.
Input Signal Levels: 0.7 V (maximum logic low)
3.7 V (minimum logic high).
Input Voltage Limits: –0.25 V (absolute minimum)
+5.25 V (absolute maximum).
Maximum Source Current +2.0 mA at >2.7 V (per pin).
Maximum Sink Current –50 mA at 0.7 V (per pin, solid-state fuse protected).
Handler User-defined start of test, end of test, four category bits
Math Functions Rel, dB, Limit Test, Percentage, 1/x, and mX + b.
Remote Interface
LAN RJ-45 connector, 10/100BT; Virtual Front Panel.
USB Device (front panel, type B)
2.0 full speed, USBTMC compliant.
USB Host (front panel, type A)
USB 2.0, support for flash drives, FAT 32.
LXI Compliance LXI version 1.4 Core 2011.