User manual

DMM4020
Users Manual
2-10
Fluke 45 Emulation Mode
The Fluke 45 emulation mode enables you to use programs that run on the Fluke 45
multimeter model on the Tektronix DMM4020.
To switch the Meter to Fluke 45 emulation:
1. Press and hold S and f for two seconds.
2. Press U or V to scroll between 4020 and Fluke 45. The presently selected
mode will appear bright in the display, while the other is dim.
3. Press R to set the mode and reset the Meter.
Illuminating All Display Segments
To illuminate all display segments, start with the Meter display off. Next, press and hold
S then press P to turn on the Meter. Release the buttons when the display
illuminates. To return to normal measurement mode, press S.