User manual

DMM4020
Users Manual
2-8
Adjusting the Bail
The Meter’s bail (handle) is adjustable to provide two viewing angles. The bail is also
adjustable for carrying or storing the Meter.
To adjust the bail, pull the ends out to a hard stop (about 1/4-inch on each side) and then
rotate it to one of the four stop positions as shown in Figure 2-3.
To remove the bail, adjust it to the vertical stop position and pull the ends all the way out.
1 Store
3 Carry
4 Remove
2 Tilt up
eue21.eps
Figure 2-3. Bail Adjustment and Removal