User's Manual
Performance Ve rification
40
P6330 3.5 GHz Differential Probe Instruction Manua l
5. Using the fine position and/or pressure adjust, maneuver the
probe so that the pins cont act the CM or DM test points,
depending on which test you are performing. (See Figure 17.)
Common mode Differential mode
Figure 17: Probe Cal ibration Fixture test points
6. Verify that cont act is made on both pins. (You may need to
readjust the fine position and/or pressure adjustment to make
positive contact with the test points.)
7. Proceed with the specific test instructions.