User's Manual

Basic Test Procedures
3–10
CTS 710 SONET Test Set User Manual
2. To check the LTE response to a Section B1 error, set up the
upstream CTS 710 as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TEST SETUPS RECALL
INSTRUMENT
SETUPS
DEFAULT
FACTORY
SETTINGS
Recall Setup
TRANSMIT TRANSMIT
SETTINGS
Transmit Rate STS-1
Tx/Rx Settings Coupled
TRANSMIT ERRORS &
ALARMS
Error Type Section B1 BIP
Error Rate set to 1.0E–5
RESULTS MAIN RESULTS none Errors
Basic Test Procedures
3–10
CTS 710 SONET Test Set User Manual
2. To check the LTE response to a Section B1 error, set up the
upstream CTS 710 as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TEST SETUPS RECALL
INSTRUMENT
SETUPS
DEFAULT
FACTORY
SETTINGS
Recall Setup
TRANSMIT TRANSMIT
SETTINGS
Transmit Rate STS-1
Tx/Rx Settings Coupled
TRANSMIT ERRORS &
ALARMS
Error Type Section B1 BIP
Error Rate set to 1.0E–5
RESULTS MAIN RESULTS none Errors