Datasheet

Features
Very good accuracy (0.4% - 0.5%)
Very good linearity (<0.1%)
Wide frequency bandwidth (DC to 150 kHz)
Closed loop (compensated) current transducer using the Hall Effect
Insulated plastic case recognized according to UL 94-V0.
Low temperature drift
Compatible with standard PA3000 internal transducer supply
Tektronix custom cable assembly included for easy connection to
PA3000
No insertion losses
High immunity to external interference
Applications
High power converters and inverters
Motor drives
Solar inverters
UPS systems
Current clamps
For quick connections in an environment where it is not possible to break
the current path, a current clamp offers an easy way to measure AC
current. The CL series current clamps are sourced from AEMC.
CL200
The CL200 is the latest in compact AC current probes. It is designed to
provide quick connection to medium current circuits often found in industrial
applications.
Features
0.5 A
RMS
to 240 A
RMS
measurement range
1000:1 transform ratio
40 Hz to 10 kHz response
1.0% to 3.0% accuracy, based on primary signal level
Small, compact size
Connects directly to Tektronix power analyzers
Large jaw opening accommodates conductors up to 250 MCM
Designed to EN61010, 600 V Cat. III safety standard
Applications
High power converters and inverters
Motor drives
Solar inverters
UPS systems
CL1200
The CL1200 is an AC current clamp designed for use in industrial and
higher power environments. The ergonomic design allows it to easily clamp
onto cables or small bus bars.
Features
100 mA
RMS
to 1200 A
RMS
measurement range
1000:1 transform ratio
30 Hz to 5 kHz response
0.5% to 1.5% accuracy, based on primary signal level
Conforms to EN61010, 600 V Cat. III safety standard
Low phase shift for power measurements
Applications
High power converters and inverters
Motor drives
Solar inverters
UPS systems
Datasheet
2 www.tek.com