Datasheet

ManualsBrandsTektronix ManualsOscilloscope ModulesHall Effect Transducer

Power Analyzer Accessories

Tektronix provides a variety of accessories to use with the our power

analyzers to fit your application and measurement needs.

Fixed core Hall-effect transducers

Tektronix provides a variety of fixed core and split core current transducers

matched to our power analyzers to fit your application and measurement

needs. Fixed core transducers provide the highest accuracy available for

both AC and DC current measurements, while the split core devices are

ideally suited to making measurements in less accessible applications.

CT-xxxx-S Series

The CT-xxxx-S series offer the highest accuracy and linearity when

uncompromised measurements are required. These transducers are

sourced from LEM, a high-quality component company.

Features

Very high accuracy (0.0054% - 0.0272%)

Excellent linearity (3 ppm - 20 ppm)

Extremely low temperature drift (0.5 ppm/k - 2.5 ppm/k)

Wide frequency bandwidth (DC to 800 kHz)

Closed loop (compensated) current transducer using an extremely

accurate zero ﬂux detector

Electrostatic shield between primary and secondary circuit

No insertion losses

High immunity to external electrostatic and magnetic ﬁelds interference

Low noise on output signal

Tektronix custom cable assembly included for easy connection to the

PA3000 power analyzer

Compatible with standard PA3000 internal transducer supply (except

CT-1000-S; order optional external power supply, Keithley models

2220 for two channels or 2231A for four channels)

Applications

High power converters and inverters

Motor drives

Solar inverters

UPS systems

CT-xxxx-M Series

The CT-xxxx-M series are designed for general purpose measurement

applications where accuracy requirements are less stringent. These

transducers are sourced from LEM, a high-quality component company.

www.tek.com 1

Summary of content (6 pages)

PAGE 1
Power Analyzer Accessories Features Very high accuracy (0.0054% - 0.0272%) Excellent linearity (3 ppm - 20 ppm) Extremely low temperature drift (0.5 ppm/k - 2.
PAGE 2
Datasheet Features Very good accuracy (0.4% - 0.5%) Very good linearity (<0.1%) Wide frequency bandwidth (DC to 150 kHz) Closed loop (compensated) current transducer using the Hall Effect CL200 The CL200 is the latest in compact AC current probes. It is designed to provide quick connection to medium current circuits often found in industrial applications. Features Insulated plastic case recognized according to UL 94-V0. 0.
PAGE 3
Power Analyzer Accessories Measurement accessories These accessories help to simplify your circuit connections and make your measurement tasks easier. Test leads BB1000-UN Breakout Box . PA-LEADSET Replacement lead set for Tektronix power analyzers. This insulated, stackable test lead set is rated for 1000 V, 32 A, CAT II, and is UL61010 compliant.
PAGE 4
Datasheet BB1000-UK Breakout Box BALLAST-CT Ballast-CT The Tektronix Ballast-CT simplifies the measurement of output power and tube current in high frequency electronic lighting ballasts. This device is specifically designed for lighting applications, and overcomes problems that are usually found when using conventional or Hall Effect current transformers.
PAGE 5
Power Analyzer Accessories Specifications All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise. The specifications are subject to change without notice. CT-xxxx-S Series Model LEM part number Nominal primary current (rms) Nominal primary current (Ip, DC) Nominal secondary current (Is) Supply voltage Supply consumption Transform ratio Accuracy Bandwidth CT-60-S IT 60-S 42 A 60 A 100 mA ±15 V 80 mA + Is 1:600 0.
PAGE 6
Datasheet Ordering Information Models CT-S Series CT-60-S, CT-200-S, CT-1000-S CT-M Series CT-100-M, CT-200-M, CT-1000-M CL Series CL200, CL1200 Test Leads PA-LEADSET Breakout Box BB1000-UN, BB1000-NA, BB1000-EU, BB1000-UK Ballast-CT BALLAST-CT Accessories All CT series current transducers (except for CT-1000-S) include cabling that allows easy and direct connection to the ±15 V supply on the PA3000 Power Analyzer, and directly to the 1 A shunt.