User manual

Using the Menus
1760 Series Component Waveform/Vector Monitor User Manual
3-20
Configure Menu
Push the CONFIG button to display the configure menu,
shown in Figure 3-6. Turn the left bezel control to select
INPUT, VECTOR, FORMAT, STANDARD, OFFSET, CALIBRATE,
REMOTE
, or REFERENCE (a box appears around the selec-
tion). Following are descriptions of each sel ection.
INPUT
H COUPLING — Selects AC or DC coupling for
rear-panel inputs.
H
DC RESTORER —Selects the clamp speed. Slow
will clamp while displaying a ny hum.
H
CLAMP—Sel ects the point of the video signal t hat is
clamped to 0. Can be set for
ST (sync tip) or BP
(back porch).
VERTPOS
HORIZPOS
CLEAR
MENU
Bezel
Buttons
Left Center Right
INPUT
VECTOR
FORMA T
STANDARD
OFFSET
CALIBRATE
REMOTE
REFERENCE
COUPLING
AC DC
DCRESTORER
SLOW FAST
CLAMP
ST BP
A123
COMPOSITE
COMPONENT
B123
COMPOSITE
COMPONENT
Figure 3-6. The CONFIGURE menu display with INPUT selected.