User manual

Installation
1760 Series Component Waveform/Vector Monitor User Manual
1-13
Rackmounting
The 1760--Series monitors are half-rack width and three ra ck
units high. They require approximately three inches of re ar
clearance for power cord and cable connections, and 20 in-
ches in front of a rack for installation and removal of the
instrument.
The optional 1700F05 rack adapter a llows two Tektronix
half-rack instruments to be mounted side-by-side in a rack.
If only one section of the rack adapter is used, a 1700F06
blank panel or 1700F07 utility drawer can be inserted in the
unused section. See page 1-8 for ordering information.