User manual

Glossary
G-4
1760 Series Component Waveform/Vector Monitor User Manual
CW Continuous Wave. Refers to a separate subcarrier sine
wave used for synchroniza tion of chrominance information.
dB (Decibel) A decibel is a logarithmic unit used to de-
scribe signal ratios. For voltages, dB = 20 Log
10
(V
1
/V
2
).
DC-Coupled A connection c onfigured so that both the
signal (AC component) and the constant voltage on which it
is riding (DC component) are passed through.
DC Restorer A circuit used in picture monitors and wa-
veform monitors to clamp one point of the waveform to a
fixed DC level.
Demodulator In general, this term refers to any devi ce
which recovers the origina l signa l after it has modulated a
high-frequency carrier. In television it m ay refer to:
(1) An instrument, such as a TEKTRONIX 1450, which
takes video in its transmitted form (modulated onto the pic-
ture carrier) and converts i t t o baseband.
(2) The circuits which recover R--Y and B--Y for NTSC sys-
tems or U a nd V for PAL systems from the composite signal.
Digital Components Component signals in which the
values for each pixel are represented by a set of numbers.
Distortion If a sine wave of a single frequency is put into
a system, and harmonic content at multiples of that frequen-
cy appears at t he out put, there is harmonic distortion present
in the system. Harmonic distortion is caused by nonlineari-
ties in the system.
Equalizer T he pulses which occur before and after the
broad pulses in the vertical interval.
Envelope Detection A demodulation process in which
the shape of the RF envelope is sensed. Thi s is the process
used by a di ode detector.
Field In interlaced scan systems, the information for one
picture is divided up into two fields. Each field contains one
half of the lines requi red to produce the entire picture. Adja-
cent lines in the picture are in alternate fields.