Datasheet

BB1000 Breakout Box

BB1000-NA Breakout Box

BB1000-EU Breakout Box

BB1000-UK Breakout Box

The BB1000 Breakout Box makes wiring connections between your device-

under-test and Tektronix power analyzers easy and safe, by 'breaking out'

the current flow for connection to the internal current shunt in the analyzer.

It provides a line output socket to power your device under test (up to

10 A

RMS

) and 4 mm sockets for direct connection to the Tektronix power

analyzer terminals. The BB1000 Breakout box is offered in three different

versions with these receptacle styles:

BB1000-NA: 120 V North America receptacle

BB1000-EU: 240 V Euro receptacle

BB1000-UK: 240 V United Kingdom receptacle

BALLAST-CT

The Tektronix Ballast-CT simplifies the measurement of output power and

tube current in high frequency electronic lighting ballasts. This device is

specifically designed for lighting applications, and overcomes problems that

are usually found when using conventional or Hall Effect current

transformers. When used in conjunction with a Tektronix PA1000 or

PA4000 power analyzer, the free-standing Ballast-CT accessory provides a

convenient and accurate solution to taking power measurements in lighting

ballast circuits.

Convenience: No need to feed cables through a CT core

High accuracy: Trifilar-wound toroidal design

No cable positioning/contact error

Wide bandwidth: High frequency design provides 5 kHz to 1 MHz

bandwidth

Wide current range: 5 mA to 1 A is compatible with many modern

ballasts

Power Analyzer Accessories

www.tektronix.com 3