User's Manual

Waveform Mixing Mode
3-246 AWG710&AWG710B Arbitrary Waveform Generator User Manual
B is small, it repeats until it becomes the number of points of a mixed
waveform.
 Same as B: The number of points of a mixed waveform is made the same as
the number of points of Waveform B. When the number of points of Waveform
A is small, it repeats until it becomes the number of points of a mixed
waveform.
 LCM(A,B): The number of points of a mixed waveform is made into the least
common multiple of the number of points of two waveforms.
1. Push Waveform/Sequence (bottom)!Setting... (side)!Wfm Len(side)
2. Use the general purpose knob or Wfm Len menu button to select the length of
a mixed waveform.
Update
Loading of the file in AWG mode sets data to the waveform memory for a
waveform output. On the other hand, loading of the file in Waveform Mixing mode
sets data to the work area for waveform mixing. When data is set to Waveform A
and Waveform B, preparation of waveform mixing will be completed. Based on
parameters of waveform mixing, a mixed waveform is generated in a work area,
and a mixed waveform is outputted in loading to a waveform memory.
With the Update button, you can specify the timing which generates a mixed
waveform and is loaded to a waveform memory.
 Auto: When the file of Waveforms A or B is changed, or when a waveform
mixing parameter is changed, a mixed waveform is regenerated and waveform
data is loaded to a waveform memory.
 Manual: When the Update Waveform button (it will become effective if
Manual is selected) is pushed, a mixed waveform data is regenerated and it is
loaded to a waveform memory.
It takes much time in order to generate a large mixed waveform. By choosing
Manual, it can prevent regenerating a mixed waveform at every parameter change.
1. Push Waveform/Sequence (bottom)!Update (side)
2. Push the Update side button to toggle between Auto and Manual.
When Manual is selected, the Update Waveform side button becomes effective.