User's Manual
Table Of Contents
- Title page
- Table of Contents
- General Safety Summary
- Preface
- Getting Started
- Operating Basics
- Reference
- Reference
- Menu Structures
- The Setup Menu Screen
- The Graphical Waveform Editor
- The Pattern Editor
- Quick Editing
- The Table Editor
- The Equation Editor
- The Sequence Editor
- The APPL Menu
- The UTILITY Window
- External Keyboards
- Setting General Purpose Knob Direction
- Formatting a Floppy Disk
- Displaying Disk Usage
- Screen Display Enable/Disable
- Focused Color
- Displaying Instrument Status
- Internal Clock (Date and Time)
- Resetting the Instrument
- Connecting to a GPIB Network
- Ethernet Networking
- Hardcopy
- Calibration and Diagnostics
- Upgrading the System Software
- Capturing Waveforms
- Waveform Programming Language
- Command Descriptions
- Programming Examples
- File Conversion
- File Management
- FG Mode
- Waveform Mixing Mode
- Synchronous Operation Mode (AWG710B only)
- Appendices
- Appendix A: Specifications (AWG710B)
- Appendix A: Specifications (AWG710)
- Appendix B: Performance Verification (AWG710B)
- Conventions
- Self Tests
- Performance Tests
- Operating Mode Tests
- Amplitude and Offset Accuracy Tests (Normal Out), (except option 02)
- Amplitude, Offset Accuracy and Rise Time Tests (Direct DA Out), (except option 02)
- Amplitude, Offset Accuracy and Rise Time Tests (for option 02)
- Pulse Response Tests (Normal Out), (except option 02)
- Trigger Input Tests
- Event Input and Enhanced Mode Tests
- External Clock Input and VCO Out Output Tests
- VCO OUT Output Frequency and 10 MHz Reference Input Tests
- Marker Output Tests
- Synchronous Operation Tests
- Appendix B: Performance Verification (AWG710)
- Conventions
- Self Tests
- Performance Tests
- Operating Mode Tests
- Amplitude and Offset Accuracy Tests (Normal Out), (except option 02)
- Amplitude, Offset Accuracy and Rise Time Tests (Direct DA Out), (except option 02)
- Amplitude, Offset Accuracy and Rise Time Tests (for option 02)
- Pulse Response Tests (Normal Out), (except option 02)
- Trigger Input Tests
- Event Input and Enhanced Mode Tests
- 1/4 Clock Frequency and 10 MHz Reference Input Tests
- Marker Output Tests
- Appendix C: Inspection and Cleaning
- Appendix D: Sample Waveforms
- Appendix E: File Transfer Interface Outline
- Appendix F: Miscellaneous
- Appendix G: Sequence File Text Format
- Index
The UTILITY Window
3-166 AWG710&AWG710B Arbitrary Waveform Generator User Manual
Optional Parameters
You can set the DHCP Lease Time, NFS Timeout and FTP server version. Do the
following steps to set these parameters.
1. Push UTILITY (front–panel)!Service (bottom)!Tweak AWG1
(pop–up)!OK (side).
2. Push DHCP Lease Time (side) and set the DHCP Lease time using the general
purpose knob or the numeric keypads. The time range is from 30 to 86400
seconds (24 hours).
3. Push NFS Timeout (side) and set the NFS Timeout using the general purpose
knob or the numeric keypads. The time range is from 25 to 300 seconds.
4. Push FTP Version (side) button to toggle between Standard and Obsolete.
Usually, select Standard.
Mounting Remote File
Systems
Figure 3-55 shows the screen menu in which you can set the parameters to mount
a remote file system on the AWG710&AWG710B Arbitrary Waveform Generator,
using the NFS protocol. Refer to the documentation about the NFS, for the details
on the remote file system, the NFS protocol and/or how to set the NFS in the
computers.
Figure 3-55: UTILITY screen mounting remote file system
Do the following steps to mount the remote file system:
1. Push UTILITY (front–panel)!Network (bottom).