Datasheet

AFG showing the nominal waveform with InstaView

™

turned off

With the patented InstaView

™

technology, the AFG31000 series can

measure and show the waveform at the DUT, instead of just the nominal

waveform set on the AFG, without any other instrument. All you need is just

the cable between the AFG output and the DUT, which has already been

there. The shown waveform changes in real time along with the settings

like frequency, amplitude and waveform shape changes, or the impedance

change at the device under test. The InstaView

™

helps users to eliminate

the uncertainty and risk caused by the unmatched impedance without extra

cost or effort.

The following picture shows the same test setup, with the exception the

InstaView

™

is turned on. Instead of the “nominal” square waveform, it

displays the waveform at the DUT.

AFG showing the nominal waveform with InstaView

™

turned on

Intuitive User Interface Makes the Test Job

Enjoyable

The large 9-inch capacitive touch screen displays all related settings and

parameters on the same page. Like what you do on their smartphones or

tablets, users can click or swipe on the screen to browse, locate and

change the parameters easily. Or they can swipe from top/bottom of the

screen to callout short-cut menus of frequently-used functions or settings,

instead of going back and forth in a comprehensive menu structure in

before. This makes the operations more intuitive and much quicker than

ever, and save users’ time learning and using the tool to let them focus on

the jobs on hands.

At the same time, front panel buttons and rotary knob are kept, in order to

accommodate the needs of those who prefer sticking to the traditional ways

of operation that they have been using for long time.

AFG31000 Series