Datasheet

Specifications
1
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Model overview
AFG3011C AFG3021C,
AFG3022C
AFG3051C,
AFG3052C
AFG3101C,
AFG3102C
AFG3151C,
AFG3152C
AFG3251C,
AFG3252C
Channels 1 1 / 2 1 / 2 1 / 2 1 / 2 1 / 2
Waveforms Sine, Square, Pulse, Ramp, Triangle, Sin(x)/x, Exponential Rise and Decay, Gaussian, Lorentz, Haversine, DC, Noise
General characteristics (AFG3000 series)
Sine waves
Frequency range
AFG3011C
AFG3021C, AFG3022C AFG3051C, AFG3052C
1 µHz to 10 MHz 1 µHz to 25 MHz 1 µHz to 50 MHz
Sine wave in Burst Mode
1 µHz to 5 MHz
1 µHz to 12.5 MHz 1 µHz to 25 MHz
Effective maximum frequency
out
10 MHz
25 MHz 50 MHz
Amplitude flatness (1 V
p-p
)
<5 MHz: ±0.15 dB
≥5 MHz to 10 MHz: ±0.3 dB
<5 MHz: ±0.15 dB
≥5 MHz to 20 MHz: ±0.3 dB
≥20 MHz to 25 MHz: ±0.5 dB
<5 MHz: ±0.15 dB
≥5 MHz to 45 MHz: ±0.3 dB
≥45 MHz to 50 MHz: ±0.5 dB
Amplitude flatness (1 V
p-p
),
typical
<5 MHz: ±0.11 dB
≥5 MHz to 10 MHz: ±0.2 dB
<5 MHz: ±0.06 dB
≥5 MHz to 25 MHz: ±0.02 dB
<5 MHz: ±0.06 dB
≥5 MHz to 50 MHz: ±0.02 dB
Harmonic distortion (1 V
p-p
)
10 Hz to 20 kHz: < -60 dBc
≥20 kHz to 1 MHz: < -55 dBc
≥1 MHz to 5 MHz: < -45 dBc
≥5 MHz to 10 MHz: < -45 dBc
10 Hz to 20 kHz: < -70 dBc
≥20 kHz to 1 MHz: < -60 dBc
≥1 MHz to 10 MHz: < -50 dBc
≥10 MHz to 25 MHz: < -40 dBc
10 Hz to 20 kHz: < -70 dBc
≥20 kHz to 1 MHz: < -60 dBc
≥1 MHz to 5 MHz: < -50 dBc
≥5 MHz to 50 MHz: < -40 dBc
Harmonic distortion (1 V
p-p
),
typical
10 Hz to 20 kHz: < -73 dBc
≥20 kHz to 1 MHz: < -72 dBc
≥1 MHz to 5 MHz: < -65 dBc
≥5 MHz to 10 MHz: < -56 dBc
10 Hz to 20 kHz: < -77 dBc
≥20 kHz to 1 MHz: < -72 dBc
≥1 MHz to 25 MHz: < -55 dBc
10 Hz to 20 kHz: < -75 dBc
≥20 kHz to 1 MHz: < -72 dBc
≥1 MHz to 5 MHz: < -65 dBc
≥5 MHz to 50 MHz: < -56 dBc
THD
≤0.2% (<0.15%, typical), 10 Hz to 20 kHz, 1 V
p-p
Spurious(1 V
p-p
)
10 Hz to 1 MHz: < -60 dBc
≥1 MHz to 10 MHz: < -50 dBc
10 Hz to 1 MHz: < -60 dBc
≥1 MHz to 25 MHz: < -50 dBc
10 Hz to 1 MHz: < -60 dBc
≥1 MHz to 50 MHz: < -50 dBc
Spurious(1 V
p-p
), typical
10 Hz to 1 MHz: < -61 dBc
≥1 MHz to 10 MHz: < -68 dBc
10 Hz to 1 MHz: < -71 dBc
≥1 MHz to 25 MHz: < -68 dBc
10 Hz to 1 MHz: < -71 dBc
≥1 MHz to 50 MHz: < -69 dBc
Phase noise, typical
< -110 dBc/Hz at 10 MHz, 10 kHz offset,
1 V
p-p
< -110 dBc/Hz at 20 MHz, 10 kHz offset, 1 V
p-p
Residual clock noise
-63 dBm
-63 dBm -63 dBm
Square waves
Frequency range
AFG3011C
AFG3021C, AFG3022C AFG3051C, AFG3052C
1 µHz to 5 MHz 1 µHz to 25 MHz 1 µHz to 40 MHz
Rise/fall time
≤50 ns
≤9 ns ≤7 ns
1
The given typical values are not warranted. But 80% or more manufactured units will perform to the level indicated at room temperature (approximately 25 °C).
Datasheet
2 www.tek.com