Datasheet

Internal noise add When activated, output signal amplitude is reduced to 50%
Level 0.0% to 50% of amplitude (V
p-p
) setting
Resolution 1%
Main output 50 Ω
Remote programming:
configuration times, max, typical
GPIB, LAN 10BASE-T / 100BASE-TX, USB 1.1
Compatible with SCPI-1999.0 and IEEE 488-2 standards
Function change
USB LAN GPIB
81 ms 81 ms 81 ms
Frequency change (except
Pulse)
2.5 ms
6 ms 3.2 ms
Frequency change (Pulse)
40 ms
37 ms 32 ms
Amplitude change
90 ms
97 ms 90 ms
Select user ARB (4k points
from USB Memory)
48 ms
50 ms 49 ms
Select user ARB (128k points
from USB Memory)
260 ms
266 ms 240 ms
Remote programming: data
download time for 4000 point
waveform data, typical
USB
LAN GPIB
47 ms 78 ms 320 ms
Power source 100-240 V, 47-63 Hz, or 115 V, 360-440 Hz
Power consumption Less than 120 W
Warm up time, typical 20 minutes
Power on self-diagnosis, typical <10 s
Acoustic noise, typical <50 dBA
Display 5.6 in. Color TFT LCD
User interface and Help languages English, French, German, Japanese, Korean, Portuguese, Simplified and Traditional Chinese, Russian (user selectable)
Modulation characteristics
AM, FM, PM
Carrier waveforms All except Pulse, Noise, and DC
Source Internal/external
Internal modulating waveform Sine, square, ramp, noise, ARB
(AM: maximum waveform length 4,096; FM/PM: maximum waveform length 2,048)
Internal modulating frequency 2 mHz to 50.00 kHz
AM modulation depth 0.0% to +120.0%
Min FM peak deviation DC
Max FM peak deviation See following table,
PM phase deviation -360.0° to +360.0°
Datasheet
System characteristics
8 www.tek.com