Datasheet

Jitter (RMS)
500 ps 500 ps 300 ps
Jitter (RMS), typical
<210 ps <60 ps <60 ps
Ramp waves
Frequency range
AFG3011C AFG3021C, AFG3022C AFG3051C, AFG3052C
1 µHz to 100 kHz 1 µHz to 500 kHz 1 µHz to 800 kHz
Linearity, typical
≤0.2% of peak output ≤0.1% of peak output ≤0.1% of peak output
Symmetry
0% to 100.0%
Pulse waves
Frequency range
AFG3011C
AFG3021C, AFG3022C AFG3051C, AFG3052C
1 mHz to 5 MHz 1 mHz to 25 MHz 1 mHz to 40 MHz
Pulse width
80.00 ns to 999.99 s
16 ns to 999.99 s 12 ns to 999.99 s
Resolution
10 ps or 5 digits
Pulse duty
0.001% to 99.999% (Limitations of pulse width apply)
Edge transition time
50 ns to 625 s
9 ns to 625 s 7 ns to 625 s
Resolution
10 ps or 4 digits
Lead delay: range
(Continuous Mode): 0 ps to Period
(Triggered/Gated Burst Mode): 0 ps to Period - [Pulse Width + 0.8 * (Leading Edge Time + Trailing Edge Time)]
Lead delay: resolution
10 ps or 8 digits
Overshoot, typical
<5%
Jitter (RMS)
500 ps
500 ps 300 ps
Jitter (RMS), typical
<210 ps
<60 ps <60 ps
Other waveforms
Frequency range
AFG3011C
AFG3021C, AFG3022C AFG3051C, AFG3052C
1 µHz to 100 kHz 1 µHz to 500 kHz 1 µHz to 800 kHz
Noise bandwidth (-3 dB)
10 MHz
25 MHz 50 MHz
Noise type:
White Gaussian
Internal noise add
When activated, output signal amplitude is reduced to 50%
Level
0.0% to 50% of amplitude (V
p-p
) setting
Resolution
1%
DC (into 50 Ω)
-10 V to +10 V
-5 V to +5 V -5 V to +5 V
Arbitrary/Function Generators AFG3000C Series
General characteristics (AFG3000 series)
www.tek.com 3