Datasheet

Internal trigger rate 1 μs to 500.0 s
Gate and trigger sources Internal, external, remote interface
Auxiliary input characteristics
Modulation inputs Channel 1, Channel 2
Input range All except FSK: ±1 V
FSK: 3.3 V logic level
Impedance 10 kΩ
Frequency range DC to 25 kHz (122 kS/s)
External Triggered/Gated Burst
input
Level TTL compatible
Impedance 10 kΩ
Pulse width 100 ns minimum
Slope Positive/negative, selectable
Trigger delay 0.0 ns to 85.000 s
Trigger delay resolution 100 ps or 5 digits
Jitter (RMS), typical Burst: <500 ps (trigger input to signal output)
10 MHz reference input
Impedance 1 kΩ, AC coupled
Required input voltage swing 100 mV
p-p
to 5 V
p-p
Lock range 10 MHz ±35 kHz
External channel 1 add input AFG3101C, AFG3102C, AFG3151C, AFG3152C, AFG3251C, AFG3252C only
Impedance 50 Ω
Input range -1 V to +1 V (DC + peak AC)
Bandwidth DC to 10 MHz (-3 dB) at 1 V
p-p
Auxiliary output characteristics
Trigger output (Channel 1)
Level Positive TTL level pulse into 1 kΩ
Impedance 50 Ω
Jitter (RMS), typical AFG3011C/21C/22C: 500 ps
AFG3051C/52C: 300 ps
AFG3101C/02C: 200 ps
AFG3151C/52C: 150 ps
AFG3251C/52C: 100 ps
Max frequency 4.9 MHz
(4.9 MHz to 50 MHz: A fraction of the frequency is output;
>50 MHz: no signal is output)
Datasheet
Modulation characteristics
10 www.tek.com