Datasheet

Arbitrary Fun ction G enerators — AFG3000C Series
Sweep: Max Start/Stop Frequency
Characteristic AFG3011C AFG3021C
AFG3022C
AFG3051C
AFG3052C
AFG3101C
AFG3102C
AFG3251C
AFG3252C
Sine
10 MHz 25 MHz 50 MHz 100 MHz 240 MHz
Square
5 MHz 25 MHz 40 MHz 50 MHz 120 MHz
ARB 5 MHz 12.5 MHz 25 MHz 50 MHz 120 MHz
Others
100 kHz 500 kHz 800 kHz 1 MHz 2.4 MHz
Frequency Shift Keying
Characteristic
Description
Carrier Waveforms All, except Pulse, Noise, and DC
Source Internal/External
Internal Modulating
Frequency
2 mHz to 1.000 MHz
Number of Keys
2
Sweep
Characteristic
Description
Waveform
s
All, exce
pt Pulse, Noise, and DC
Type Linear, logarithmic
Sweep Tim
e
1msto300s
Hold/Ret
urn Time
0msto300s
Max Tota
l Sweep Time
300 s
Resolution 1 ms or 4 digits
Total S w
eep Time
Accurac
y, typical
≤0.4%
Min Start/Stop
Frequency
All except ARB: 1 µHz
ARB: 1 mHz
Max St
art/Stop
Frequ
ency
See ch
art, below
Burst
Characteristic
Description
Waveforms All, except Noise and DC
Type
Triggered, gated (1 to 1,000,000 cycles or Infinite)
Internal Trigger Rate 1 μsto500.0s
Gate and Trigger
Sources
Internal, external, remote interface
Auxiliary Inputs
Characteristic
Description
Modulation Inputs Channel 1, Channel 2
Input range
All except FSK: ±1 V
FSK: 3.3 V logic level
Impedance
10 kΩ
Frequency range
DC to 25 kHz (122 kS/s)
External Triggered/Gated Burst Input
Level TTL compatible
Impedance
10 kΩ
Pulse width 100 ns minimum
Slope Positive/Negative, selectable
Trigger delay 0.0 ns to 85.000 s
Resolution 100 ps or 5 digits
Jitter (RMS), typical Burst: <500 ps (Trigger input to signal output)
10 MHz Reference Input
Impedance
1kΩ, AC coupled
Required Input
Voltage Swing
100 mV
p-p
to5V
p-p
Lock Range 10 MHz ±35 kHz
External Add Input
(CH1)
AFG3101C, AFG3102C, AFG3251C, AFG3252C only
Impedance
50 Ω
Input range
-1Vto+1V(DC+peakAC)
Bandwidth
DC to 10 MHz (-3 dB) at 1 V
p-p
Auxi
liary Outputs
Characteristic
Description
Trigger Output (Channel 1)
Level
Positive TTL level pulse into 1 kΩ
Impedance
50 Ω
Jitter (RMS), typical AFG3011C/21C/22C: 500 ps
AFG3051C/52C: 300ps
AFG3101C/02C: 200 ps
AFG3251C/52C: 100 ps
Max Frequency 4.9 MHz
(4.9 MHz to 50 MHz: A fraction of the frequency is output;
>50 MHz: no signal is output)
Clock Reference Out
(10 MHz)
AFG3101C, AFG3102C, AFG3251C, AFG3252C only
Impedance
50 Ω, AC coupled
Amplitude
1.2 V
p-p
into 50 Ω load
www.tektronix.com 5