Instructions
Table Of Contents
- Table of contents
- Preface
- Getting started
- General features
- Before installation
- Standard accessories
- Operating requirements
- Power the instrument on and off
- Change instrument settings at power-on
- Erase waveforms from memory
- Select a local language
- Protect your instrument from misuse
- General care
- Update your instrument firmware
- Equivalent output circuits
- Instrument front panel, interface, and rear panel
- Operating basics
- Quick tutorial: How to select a waveform and adjust parameters
- Quick tutorial: How to generate a sine waveform
- Quick tutorial: Instrument help system
- Generate a pulse waveform
- Generate a built-in waveform
- Create/save a user-defined waveform
- Recall a user-defined waveform
- Generate noise
- Generate DC
- Sweep a waveform
- Modulate a waveform
- Generate a burst waveform
- Copy channel setting
- USB memory device
- Utility menu
- Save/recall instrument setup
- Application examples
- Appendix A: Line fuse replacement
- Index
Operating basics
AFG1000 Series Quick Start User Manual
33
6.
To copy a waveform file
from the USB memory
device to the internal
memory:
Follow the previous steps
to recall the waveform from
the USB memory device.
Press Back to return to the
upper directory. In the
interface of selecting
memory, use the general
purpose knob to select
INTER and then press
Enter. Use the front panel
general purpose knob to
select a USER file. Press
Save.
NOTE:
On the Arb waveform
interface, Shape shows the
memory location of current
waveform. USER indicates
internal memory, External
indicates USB memory device.