Instructions
Table Of Contents
- Table of contents
- Preface
- Getting started
- General features
- Before installation
- Standard accessories
- Operating requirements
- Power the instrument on and off
- Change instrument settings at power-on
- Erase waveforms from memory
- Select a local language
- Protect your instrument from misuse
- General care
- Update your instrument firmware
- Equivalent output circuits
- Instrument front panel, interface, and rear panel
- Operating basics
- Quick tutorial: How to select a waveform and adjust parameters
- Quick tutorial: How to generate a sine waveform
- Quick tutorial: Instrument help system
- Generate a pulse waveform
- Generate a built-in waveform
- Create/save a user-defined waveform
- Recall a user-defined waveform
- Generate noise
- Generate DC
- Sweep a waveform
- Modulate a waveform
- Generate a burst waveform
- Copy channel setting
- USB memory device
- Utility menu
- Save/recall instrument setup
- Application examples
- Appendix A: Line fuse replacement
- Index
Instrument front panel, interface, and rear panel
AFG1000 Series Quick Start User Manual
23
Rear panel
The following illustration shows the rear panel connectors for the instrument.
1
2
345
6
78
Item Description
1
Power input: This is where you attached an appropriate power cord to supply
power to the instrument.
2
Fuse: Use the specified fuse according to the voltage scale.
The rating of replaceable fuse:
Voltage Fuse
100 - 120 V
250 V, F1AL
220 - 240 V
250 V, F0.5AL
3
Power line selector: Switch between 110 V / 220 V.
4
USB (type B) connector: This can be used to connect a USB type B controller.
5
Ext Mod In Connector: This is the BNC connector for an external
modulation input. It can be used to input a modulating signal.
6
Fsk/Ext Trig In connector: This is the BNC connector for an FSK/ASK/PSK/external
trigger/burst input.
7
Ref Clk/Counter In connector: This is the BNC connector for an external reference
clock or counter input.
8
Ref Clk Out connector: This is the BNC connector for an external reference clock
output.