Datasheet

Voltage Range and Sensitivity, DC
coupled (non-modulation signal)
100 mHz to 100 MHz 250 mV
p-p
to 5 V
p-p
(AC + DC)
100 MHz to 200 MHz 450 mV
p-p
to 3 V
p-p
(AC + DC)
Voltage range and sensitivity, AC
coupled (non-modulation signal)
1 Hz to 100 MHz 250 mV
p-p
to 5 V
p-p
100 MHz to 200 MHz 450 mV
p-p
to 4 V
p-p
Pulse width and duty cycle
measure
1 Hz to 10 MHz
Input impedance 1 M Ω in parallel with 100 pF
High frequency noise restraint
(HFR)
On / Off (HFR frequency = 500 kHz)
Sensitivity Low, middle, or high
Trigger level range -2.5 V to +2.5 V
Auxiliary inputs and outputs
External modulation input
Input frequency range DC to 20 kHz
Input voltage range All except FSK: ±1 V full scale, FSK: 3.3 V logic level
Input impedance 12 kΩ (typical)
External trigger input
Level TTL-compatible
Slope Rising or falling (selectable)
Pulse Width >100 ns
External reference clock input (Shared with Frequency Counter Input)
Impedance 400 Ω, AC coupled
Requested Input voltage
swing
100 mV
p-p
to 5 V
p-p
Locking range 10 MHz ±9 kHz
External reference clock output
Frequency 10 MHz
Impedance 50 Ω, DC coupled
Amplitude 1.6 V
p-p
into 50 Ω load
Communication interface
USB Host and device, USB TMC compliance
AFG1000 Series Arbitrary Function Generator Datasheet
Frequency counter
www.tektronix.com 7